$48.99
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
When you're running a defensive or working shotgun, capacity is everything, and reaching for a pocket full of loose shells slows you down. The Mesa Tactical SureShell Polymer Carrier fixes that by putting six spare 12-gauge rounds right on the side of your Remington receiver, ready to grab. It's a proven design that shaves weight and cost off the aluminum version without giving up the retention and durability that made SureShell a go-to name.
The shell holders are injection molded from glass-filled polymer, then secured to the receiver by a lightweight aluminum backplate with brass threaded inserts. That combination keeps things tough without adding a bunch of extra heft to your shotgun. The real trick is the dual rubber friction retention system, which grips each shell firmly enough that you can load them brass-up or brass-down and they'll stay put through recoil. Each carrier ships with softer black rubber installed for most factory shells, plus a set of harder white rubber inserts for specialty loads, so you can dial in the tension you want.
Installation is straightforward and needs no gunsmithing. The mount uses your factory trigger group pin holes, replacing the rear action pin with a steel fastener and using paired Chicago screws up front for a snug hold that won't pinch the receiver. Most folks have it on in a few minutes with basic tools. One thing worth knowing before you order: this carrier mounts on the left side, and factory forends that overlap the receiver when you rack the action back may need to be trimmed or swapped for a tactical forend so everything cycles clean. A dab of thread locker on the screws is smart insurance against loosening under heavy recoil.
Built in the USA and backed by a lifetime warranty, this SureShell carrier is the kind of upgrade that tends to outlast the gun it's bolted to.
This model is built specifically for the 12-gauge Remington 870, 1100, and 11-87. It mounts on the left side of the receiver using the factory trigger group pin holes, so it's a direct fit for those platforms without any drilling or gunsmithing.
It depends on your forend. Factory forends that overlap the receiver when you rack the action back can contact the carrier and need to be trimmed, or you can swap to a tactical forend that clears the receiver. Standard tactical forends generally work without any changes.
Yes. The dual rubber friction retention system grips each round firmly, and it holds shells whether you load them brass-up or brass-down. It ships with black rubber for most standard shells, plus harder white inserts if you want extra tension for specialty loads.
Most people have it mounted in just a few minutes with basic tools. You remove the factory trigger pins and replace them with the included steel fastener and Chicago screws. A drop of thread locker is a good idea to keep everything tight under heavy recoil.
| UPC | 878405004264 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 94740 |
| Caliber/Gauge | 12 Gauge |
| Capacity | 6 |
| Style | Ammo Carrier |
You must be logged in to post a review.
Reviews
There are no reviews yet.