Description
Muzzle flash is one of those things you don't think about until you're shooting in low light and it wrecks your night vision. The SureFire SOCOM SF3P three-prong flash hider was designed to solve exactly that, using a patented prong design that typically cuts visible muzzle flash by more than 99% compared to a bare muzzle. That means cleaner sight pictures in fading light and a lot less distraction between shots. This version is cut for 5/8×24 threads and built specifically for rifles chambered in 6.8mm Remington SPC.
What Sets the SOCOM SF3P Apart
This is not just a flash hider. It pulls double duty as a mounting surface for SureFire SOCOM Series Fast-Attach suppressors, so if a can is on your radar down the road, you're already halfway there. Multiple bearing surfaces and single-point-cut threads give the suppressor a repeatable, concentric lockup, which helps keep your point of impact consistent and your prongs from ringing inside the can. Every unit gets inspected for concentricity and alignment before it leaves the factory.
Built Tough for the Long Haul
SureFire machines the SF3P from U.S. mill-certified, heat-treated stainless steel bar stock, then coats it in DLC to fight off erosion and hold up in rough conditions. The tines are engineered to take the beating of hard, high-volume shooting without complaint. Whether you're running it at the range, out hunting, or during training, it's the kind of part you bolt on and forget about because it just works.
Getting the SOCOM SF3P on Your Rifle
Installation is straightforward for anyone familiar with muzzle devices. It threads onto a 5/8×24 barrel and, since the three prongs are radially symmetrical, there's no clocking or indexing to fuss with. Combine SureFire's reputation for suppressor gear with proven flash-mitigation performance, and this is a muzzle device that earns its spot up front.
Key Specifications
- Manufacturer: SureFire
- Model: SOCOM 3-Prong Flash Hider (SF3P)
- Manufacturer Part Number: SF3P-68-5/8-24
- UPC: 084871319904
- Product Type: Flash Hider / Suppressor Adapter
- Caliber: 6.8mm Remington SPC
- Muzzle Thread: 5/8×24
- Material: U.S. Mill-Certified Heat-Treated Stainless Steel
- Finish: DLC Coating, Black
- Design: Three-Prong
- Flash Reduction: Typically more than 99%
- Suppressor Compatibility: SureFire SOCOM Series Fast-Attach Suppressors
What’s Included
- SureFire SOCOM SF3P 3-Prong Flash Hider
Frequently Asked Questions
Does the SOCOM SF3P flash hider work as a suppressor mount?
Yes. It's built to serve as a mounting surface for SureFire SOCOM Series Fast-Attach suppressors. The multiple bearing surfaces and precision threads give the can a repeatable, concentric lockup that helps keep your point of impact consistent and stops the prongs from ringing inside the suppressor.
What barrel does this SureFire 3-prong flash hider fit?
This version is threaded 5/8×24 and is designed for rifles chambered in 6.8mm Remington SPC. Make sure your barrel has matching 5/8×24 muzzle threads before ordering.
Do I need to time or index the SF3P when I install it?
No timing is required. Because the three prongs are radially symmetrical, there's no clocking to worry about like you'd have with a compensator or a slotted device. Just thread it on securely and you're good to go.
How much does the SOCOM SF3P actually reduce muzzle flash?
SureFire's patented three-prong design typically cuts visible muzzle flash by more than 99% compared to a bare muzzle. That translates to a much cleaner sight picture in low light and far less distraction between shots.





Reviews
There are no reviews yet.