$152.00
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The SureFire SOCOM SF3P is the flash hider that helped build SureFire's reputation, and it earns its keep two ways. First, it's one of the most effective flash hiders you can bolt onto a 5.56 rifle, cutting muzzle flash by typically more than 99% compared to a bare muzzle. That matters whether you're running low-light drills, working indoors, or just want to keep your position and your night vision intact. Second, it pulls double duty as a fast-attach mount for SureFire's SOCOM Series suppressors, so it grows with your setup instead of getting swapped out later.
The three-prong design is the star here. Those robust tines are built to take a beating and still perform, and they do the heavy lifting on flash reduction. When you thread on a SureFire SOCOM Series can, the design provides multiple bearing surfaces that keep the suppressor aligned and stop the prongs from ringing inside the tube. A rear labyrinth seal helps hold off carbon buildup in the indexing system, which makes pulling the can back off a lot easier after a long day of shooting.
SureFire machines the SF3P from U.S. mill-certified, heat-treated stainless steel bar stock, then finishes it with a black Ionbond DLC coating that resists corrosion and gas erosion and wipes clean without a fight. The barrel threads are single-point cut for a tight, repeatable interface, and every unit gets individually inspected for concentricity and alignment so it sits true on your muzzle.
This is the 5/8×24 threaded version set up for M4/M16 pattern rifles and variants. It's a proven piece of kit, and the SOCOM556-RC suppressor system it feeds into placed first in the most extensive suppressor testing US Special Operations Command has run. If you want serious flash reduction now and a suppressor-ready muzzle down the road, the SF3P is tough to beat.
Yes, the SF3P is designed as a rock-solid mounting adapter for SureFire SOCOM Series 5.56 Fast-Attach suppressors. Keep in mind it's built for the current SOCOM Series cans and is not compatible with SureFire's previous-generation Fast-Attach suppressors. If you're running or planning to run a SOCOM series 5.56 can, this is the muzzle device you want feeding it.
SureFire rates the three-prong SF3P at typically more than 99% flash reduction compared to a bare muzzle. In real-world use that means far less flash signature in low light and less blooming through night vision. It's one of the top performers in its class for hiding flash.
This particular SF3P has 5/8×24 threads and is set up for M4/M16 pattern rifles and their variants. Make sure your barrel is threaded 5/8×24 before ordering, since SureFire offers this device in other thread pitches too. Installation requires no permanent modifications to most weapons.
Plenty of folks install it themselves, but getting the timing right and using the correct thread sealant matters, especially if you plan to mount a suppressor to it. If you're not comfortable with muzzle device timing, having a qualified armorer or gunsmith handle it is a smart move. Proper alignment ensures the tines index correctly and your suppressor mounts true.
| UPC | 084871334358 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SF3P-556-5/8-24 |
| Caliber/Gauge | .223 REM/5.56 NATO |
| Color | Black |
| Model | |
| Product Type | Flash Hider |
You must be logged in to post a review.
Reviews
There are no reviews yet.