Description
Streamlight built the TLR-8 G Sub for folks running subcompact carry and home-defense pistols who don't want to give up light and laser capability just because their gun is small. It pairs a 500-lumen white LED throwing a 141-meter beam with an integrated 510 to 530 nm green laser, so you can identify what's in front of you and put your dot on target at the same time. Green laser is the big draw here since the human eye picks up green far quicker than red, especially in daylight or across a lit room.
What Sets the TLR-8 G Sub Apart
The whole package rides in a machined, black-anodized aluminum body that shrugs off recoil and rough handling, and it carries an IPX4 water-resistant rating for wet-weather and everyday knock-around use. At roughly 2.51 inches long and 2.77 ounces, it stays out of the way and won't throw off the balance of a small pistol. The bezel safe-off feature keeps the light from firing up in a bag or holster, which saves your battery for when it counts.
Fitment and Controls on the TLR-8 G Sub
This version is cut for 1913 short-railed subcompacts, covering guns like the Smith & Wesson M&P M2.0 subcompact, Beretta Px4 Storm subcompact, Springfield XD-E and XD-S, and the Heckler & Koch HK45 compact. The rail grip clamp lets you attach and remove it quickly without tools and without ever putting your hand in front of the muzzle. Streamlight includes interchangeable rear paddle switches so you can dial in high or low paddle setups for ambidextrous, momentary, or constant operation to match how you shoot.
Running off a single CR123A lithium battery, the TLR-8 G Sub delivers about 1.5 hours of runtime in light-only or light-and-laser mode, while the laser on its own stretches to roughly 11 hours. There's a user-enabled strobe function in there too if you want it. For a subcompact platform, it's a lot of usable capability in a footprint that barely adds anything to the gun.
Key Specifications
- Manufacturer: Streamlight
- Model: TLR-8 G Sub
- Manufacturer Part Number: 69438
- UPC: 080926694385
- Light Output: 500 lumens
- Peak Beam Intensity: 5,000 candela
- Beam Distance: 141 meters
- Laser Type: Green, 510-530 nm
- Light Runtime: 1.5 hours (light only or light/laser)
- Laser Runtime: 11 hours
- Battery: One CR123A lithium (included)
- Mount Type: Rail clamp for 1913 Picatinny short rail
- Construction: Machined anodized aluminum
- Water Resistance: IPX4
- Length: 2.51 in
- Weight: 2.77 oz
What’s Included
- TLR-8 G Sub weapon light with green laser
- Installed high paddle switch
- Low paddle switches
- Mounting kit with key
- Hex wrench
- One CR123A lithium battery
Frequently Asked Questions
What pistols does the TLR-8 G Sub for 1913 fit?
This version is built for select 1913 short-railed subcompact handguns, including the Smith & Wesson M&P M2.0 subcompact, Beretta Px4 Storm subcompact, Springfield Armory XD-E and XD-S, and the Heckler & Koch HK45 compact. It uses a rail grip clamp that attaches and removes without tools. Note this is the 1913 short-rail model, not the Glock or SIG-specific versions, so double-check your pistol's rail before ordering.
Why choose the green laser over a red one?
The human eye is more sensitive to green light, so the TLR-8 G Sub's 510 to 530 nm green dot is easier to pick up and generally more visible in bright indoor lighting and outdoor daylight. That translates to faster target acquisition when you need it. The green laser also runs about 11 hours on a single battery when used on its own.
How long does the TLR-8 G Sub run on one battery?
It runs about 1.5 hours in light-only or combined light-and-laser mode on a single CR123A lithium battery, which comes in the box. The laser used alone stretches to roughly 11 hours. The bezel safe-off feature also helps preserve battery by preventing accidental activation in storage or carry.
Can I change the switch setup on the TLR-8 G Sub?
Yes. It ships with an installed high paddle switch plus additional low paddle switches, and they're interchangeable so you can tailor the controls to your grip and shooting style. The paddles are ambidextrous and support momentary or constant operation. A hex wrench is included to make the swap.





Reviews
There are no reviews yet.