Description
Subcompact Glocks like the 26, 27, and 33 don't have a rail up front, which has always made adding a light tricky. The Streamlight TLR-6 solves that by clamping onto the trigger guard instead. You get a 100-lumen C4 LED throwing 2,000 candela out to about 89 meters, plus an integrated 640-660nm red laser, all packed into a low-profile unit that barely changes the footprint of your gun. It's a genuine two-in-one setup that keeps your carry pistol slim.
What the TLR-6 Brings to a Subcompact Glock
The ambidextrous push-button switches give you three modes to work with: laser only, light and laser together, or light only. That flexibility matters depending on whether you're clearing a dark room or lining up a shot in daylight, since the red beam stays visible even in bright conditions. Runtime lands around one hour in the LED or combo mode and stretches to roughly 11 hours running the laser by itself, all off two included CR1/3N lithium batteries.
Zeroing and Everyday Reliability on the TLR-6
The windage and elevation screws sit in brass bushings, which is a small detail that pays off by holding your laser zero shot after shot. One of the smartest features is tool-less battery replacement. You can swap the batteries without pulling the unit off the gun, so you never lose your zero just because the cells ran low. The housing is impact-resistant polymer, rated IPX4 for water resistance, and tested to survive a one-meter drop.
Holsters and Fit for Your TLR-6 Glock
This version is cut specifically for the non-railed Glock 26, 27, and 33, so it snaps on with a secure, contoured fit and no wobble. Holster support has come a long way, and plenty of makers now offer IWB and OWB Kydex options molded for a Glock running the TLR-6. As with any weapon light, pairing it with a holster that fully covers the trigger guard is the way to carry it right.
Key Specifications
- Manufacturer: Streamlight
- Model: TLR-6
- Manufacturer Part Number: 69272
- UPC: 080926692725
- Fits: Glock 26 / 27 / 33 (non-railed)
- Light Output: 100 lumens
- Peak Beam Intensity: 2,000 candela
- Beam Distance: 89 meters
- Laser: 640-660nm red aiming laser
- Operating Modes: Laser only, LED/laser combo, LED only
- Runtime: 1 hr (LED or combo), 11 hrs (laser only)
- Battery: 2x CR1/3N lithium (included)
- Housing: Impact-resistant polymer
- Water Resistance: IPX4
- Weight: 1.27 oz
- Color: Black
What’s Included
- Streamlight TLR-6 light/laser unit (Glock 26/27/33 fit)
- Two CR1/3N lithium batteries (installed)
- Mounting hardware
- Instruction manual
Frequently Asked Questions
Which Glocks does the TLR-6 69272 fit?
This specific TLR-6 is molded for the non-railed subcompact Glock 26, 27, and 33. Some owners also report fit on the Glock 28 and 39, which share the same frame profile. It mounts to the trigger guard, so it does not need a rail to attach.
Do I need a rail on my Glock to use the TLR-6?
No, and that's the whole point of this design. The TLR-6 clamps around the trigger guard rather than sliding onto an accessory rail, which is why it works on subcompact Glocks that don't have rail space up front. It gives you a light and laser without changing the overall size much.
Can I change the batteries without taking the TLR-6 off my gun?
Yes. The TLR-6 uses tool-less battery replacement, so you can swap the two CR1/3N cells while the unit stays mounted. That means you won't have to re-zero the laser after a battery change, which is a nice touch for keeping your setup ready to go.
Will my current holster work with the TLR-6 attached?
You'll want a holster made specifically for a Glock running the TLR-6, since the added unit changes the trigger guard profile. The good news is plenty of makers now offer both IWB and OWB Kydex options cut for the 26, 27, and 33 with a TLR-6. Look for one that fully covers the trigger guard for safe carry.




Reviews
There are no reviews yet.