Description
Streamlight built the TLR-1 HL to be a workhorse, and the Long Gun Kit takes that reputation and packs everything you need to run it on a rifle or shotgun into one box. At the heart of it is a C4 LED pushing out 1,000 lumens with 20,000 candela and a beam that reaches roughly 283 meters. The TIR optic shapes that output into a tight center hotspot surrounded by a broad corona, which is exactly what you want when you're lighting up a room or scanning across a yard. On two CR123A lithium batteries it runs about 1.5 hours on a charge, and the LED itself is rated for a 50,000-hour lifetime.
What Sets the TLR-1 HL Long Gun Kit Apart
The big difference between this kit and the standalone light is the remote pressure switch. Mount that pad up front near your support hand and you can trigger the beam without reaching across the receiver or breaking your grip. The tail cap keeps its own ambidextrous rocker switch too, so you get momentary and constant-on from either side, plus a "safe off" position that locks the light out so it won't drain batteries while it's stored in the safe. There's also a user-programmable strobe you can enable or disable depending on how you like to run things.
Built to Take a Beating
The housing is 6000 series machined aircraft aluminum with a black anodized finish, sealed against the elements and rated to shrug off recoil and rough handling. The rail-grip clamp system snaps on and tightens down with a thumb screw, so attaching or removing it takes seconds and never puts your hand in front of the muzzle. The kit ships with rail-locating keys for Picatinny, Glock-style, Beretta 90two, S&W SW99 and TSW, and SIG P320 rails, so it drops onto just about anything with a rail.
This is a trusted setup for home defense long guns, patrol rifles, and truck guns alike. It's the kind of light people mount and forget about because it just works when they hit the switch.
Key Specifications
- Manufacturer: Streamlight
- Model: TLR-1 HL
- Manufacturer Part Number: 69262
- UPC: 080926692626
- Color: Black
- Light Output: 1,000 lumens
- Peak Beam Intensity: 20,000 candela
- Beam Distance: 283 meters
- Run Time: 1.5 hours
- LED Lifetime: 50,000 hours
- Battery: Two 3-volt CR123A lithium (included)
- Housing: 6000 series machined aircraft aluminum, black anodized
- Mounting: Rail-grip clamp with thumb screw
- Controls: Ambidextrous momentary/constant-on with programmable strobe
- Length: 3.39 inches
- Weight: 4.18 ounces (light only)
What’s Included
- TLR-1 HL weapon light with thumb screw and safe off door switch
- Remote pressure switch
- Mounting clips
- Standard door switch
- Rail-locating keys for Picatinny, Glock-style, Beretta 90two, S&W SW99, S&W TSW, and SIG P320 rails
- Two 3-volt CR123A lithium batteries
Frequently Asked Questions
What does the Long Gun Kit include that the standard TLR-1 HL doesn't?
The Long Gun Kit adds a remote pressure switch and mounting clips on top of the standard light and tail cap door switch. That pressure pad lets you fire the beam from your support hand position without reaching across the receiver, which is the whole point of running one on a rifle or shotgun. You still get the ambidextrous tail switch too, so you have two ways to control the light.
Will the TLR-1 HL Long Gun Kit fit my rifle or shotgun?
It mounts to any MIL-STD-1913 Picatinny rail, which covers most modern rifles and plenty of shotgun forends and receivers. The kit also ships with rail-locating keys for Glock-style, Beretta 90two, S&W SW99 and TSW, and SIG P320 rails. If your long gun has a Picatinny section, this light clamps right on with the thumb screw.
How long does the battery last and does it come with batteries?
The TLR-1 HL runs about 1.5 hours of continuous output on a fresh set of two CR123A lithium batteries, and those batteries are included in the kit. The "safe off" lockout on the switch keeps the light from turning on accidentally in storage, so you're not draining cells while it sits in the safe.
Is the TLR-1 HL tough enough for recoil and rough weather?
Yes. The body is machined 6000 series aircraft aluminum with a black anodized finish, sealed against the elements and built to handle the shock of repeated firing. The C4 LED is impervious to shock with a 50,000-hour rated lifetime, so it holds up on both hard-recoiling shotguns and everyday range rifles.








Reviews
There are no reviews yet.