Description
Most fighting shotguns leave you with nowhere to mount a light and no clean spot for a sling. That is the gap the Strike Industries Shotgun Barrel Clamp for 12-Gauge fills. It wraps around your barrel and magazine tube up front, adding a little rigidity to the feed tube while giving you a Picatinny rail on one face and a 360-degree free-swivel quick-detach socket on the other. You pick which side gets the rail and which gets the QD, so lefties and righties can both set it up the way they run their gun.
Where the Barrel Clamp Earns Its Keep
The rail sits close to the muzzle, which is exactly where you want a weapon light on a home-defense or competition scattergun. Push-button lights, pressure pads, lasers, anything with a Picatinny footprint bolts right up. Flip to the other side and the QD socket lets you clip and unclip a sling in a second, with full rotation so the sling never binds when you shoulder the gun or transition. It is a two-in-one mount that keeps your handguard area clean instead of stacking on multiple clamps.
Built From 6061-T6, Not Plastic
Strike machined this clamp from 6061-T6 aluminum and finished it in black anodize, so it stays light without flexing on you. The two-piece design pinches down over the barrel and mag tube with a pair of set screws, and Strike includes a dab of blue threadlocker so nothing walks loose under recoil. It is a low-profile piece that blends in with a Benelli or Remington finish rather than sticking out like an afterthought.
Fitment Worth Checking First
Strike officially tested this clamp on the Benelli M2, Benelli M4, and Remington 870, and it fits most common 12-gauge barrel and mag tube diameters. It is not made for the Mossberg 500 or 930. Installation is straightforward with the included 4mm hex tool. A handful of owners on tighter builds have grabbed slightly longer socket-head screws from the hardware store to dial in the clamping pressure, which is an easy tweak if you want a rock-solid lockup on your particular barrel.
Key Specifications
- Manufacturer: Strike Industries
- Manufacturer Part Number: SI-SG-BCL-12-BK
- UPC: 793811766035
- Gauge: 12-Gauge
- Color: Black Anodized
- Material: 6061-T6 Aluminum
- Accessory Mount: Picatinny rail (one side)
- Sling Mount: 360-degree free-swivel QD socket (opposite side)
- Mount Type: Clamp to barrel and magazine tube
- Set Screws: M5 x 14mm
- Confirmed Fitment: Benelli M2, Benelli M4, Remington 870
- Not Compatible: Mossberg 500, Mossberg 930
What’s Included
- 1x Barrel clamp, QD side
- 1x Barrel clamp, Picatinny side
- 2x Set screws (M5 x 14mm)
- 1x 4mm hex tool
- 1x Loctite Threadlocker Blue 243
- 1x Warning card
Frequently Asked Questions
What shotguns does the Strike Industries barrel clamp fit?
Strike officially confirmed fitment on the Benelli M2, Benelli M4, and Remington 870, and it works with most common 12-gauge barrel and magazine tube diameters. It is not designed for the Mossberg 500 or 930. If you are running a clone or a less common model, measure your barrel and tube spacing before ordering since it clamps around both.
Can I put the Picatinny rail and QD socket on whichever side I want?
Yes. The clamp is a two-piece design and you choose which side carries the rail and which carries the QD sling socket during install. That makes it easy to set up for left or right-handed use depending on how you want your light and sling positioned.
Is the barrel clamp hard to install?
Not at all. It goes on with the included 4mm hex tool and two set screws, and Strike throws in a bit of blue threadlocker to keep everything put under recoil. Some owners with tighter barrel-and-tube spacing have swapped in slightly longer socket-head screws from a hardware store to fine-tune the clamping pressure, which is a quick and inexpensive tweak.
What can I mount on the Picatinny rail?
The rail sits near the muzzle and accepts any accessory with a standard Picatinny footprint, so weapon lights, pressure pads, and lasers all work. Mounting a light up front is the most popular use, which is why this clamp is a go-to upgrade for home-defense and competition builds.




Reviews
There are no reviews yet.