0
0

Strike Industries Variable Optic Mount for Aimpoint Micro Standard

UPC: 793811766134

$96.99

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Strike Industries took the usual height debate off the table with this one. Instead of committing to an absolute, 1.93, or lower 1/3 riser up front, you get a single mount that slides to the height you want and locks there. The system is built around four machined parts: a Picatinny rail base, a 1.93-inch riser, a notched slider, and the optic plate that carries your red dot. Loosen the slider, pick your spot along the notches, snug it back down, and you are set.

How the Variable Optic Mount Dials In

The notched slider is the heart of the design. Those detents give you repeatable, incremental steps rather than a guessing game, so you can run absolute co-witness for backup irons that sit dead center, climb to a lower 1/3 hold, or go all the way up to 1.93 inches for a heads-up shooting position on an AR. Because the notches index the same way every time, the mount is built to return to zero after you take it apart and reinstall it, as long as you torque the hardware to spec.

What the Variable Optic Mount Fits

This is made for the Aimpoint Micro Standard footprint, which covers the Aimpoint T-1, T-2, H-1, and H-2. That same footprint is shared by a long list of popular red dots, including Holosun's 403, 503, 515, and 530 series, so the mount plays nicely well beyond genuine Aimpoint glass. One thing worth knowing: the quoted 1/3 co-witness figure is referenced to the housing height of the T-1/T-2/H-1/H-2 optics, so taller-bodied sights like the Comp M5S will sit higher than that number suggests.

Build Quality on the Variable Optic Mount

The whole assembly is machined from 6061-T6 aluminum with a black anodized finish, which keeps it light without giving up strength on a rail. It clamps to any 1913 Picatinny rail, and Strike includes the slider screws plus the small M3 hardware for securing a Micro Standard optic to the plate. For folks who like to experiment with their setup or swap optics between rifles, having one mount that covers the whole height range is a genuinely handy thing to keep on the bench.

Key Specifications

  • Manufacturer: Strike Industries
  • Manufacturer Part Number: T1VOMBK
  • UPC: 793811766134
  • Optic Footprint: Aimpoint Micro Standard (T-1/T-2/H-1/H-2)
  • Mount Type: 1913 Picatinny Rail
  • Height Range: Co-witness up to 1.93 in
  • Style: 1/3 Co-witness capable
  • Adjustment: Notched slider, incremental
  • Material: 6061-T6 Aluminum
  • Finish: Black Anodized
  • Pieces: 4-piece assembly
  • Length: 1.90"-2.40"

What’s Included

  • 1x Picatinny rail base mount (assembled)
  • 1x Optic mount plate (assembled)
  • 1x Slider
  • 1x 1.93" riser
  • 4x M3x4mm screws for Aimpoint Micro Standard optic
  • 4x M3x6mm T10 slider screws

Frequently Asked Questions

What optics will the Strike Industries Variable Optic Mount fit?

It is built for the Aimpoint Micro Standard footprint, which includes the Aimpoint T-1, T-2, H-1, and H-2. Plenty of other red dots share that same footprint, including Holosun's 403, 503, 515, and 530 models, so you are not limited to Aimpoint glass. Keep in mind that taller-bodied optics like the Comp M5S will sit higher than the listed co-witness numbers.

What height can I set with the Variable Optic Mount?

The notched slider lets you pick any indexed step from absolute co-witness up to a maximum of 1.93 inches. That range covers an absolute hold for centered backup irons, a lower 1/3 co-witness, and the popular 1.93 heads-up height for ARs. You set it yourself rather than buying a separate fixed riser for each height.

Will the mount hold zero if I take it off and put it back on?

Yes, that is a core part of the design. The notched interface indexes to the same position every time, so the mount is built to return to zero after removal and reinstallation. Just make sure you torque the hardware to Strike's spec when you reassemble it.

What does it mount to?

The base clamps to any standard 1913 Picatinny rail, so it works on most ARs, carbines, and other platforms with a Pic rail. It is not designed for Weaver-only or proprietary rail systems. The included hardware handles both the slider and securing a Micro Standard optic to the plate.

Additional information

UPC

793811766134

Manufacturer

Manufacturer Part Number

T1VOMBK

Length

1.90"-2.40"

Mount Type

Picatinny Rail

Style

1/3 Co-witness

Reviews

There are no reviews yet.

Be the first to review “Strike Industries Variable Optic Mount for Aimpoint Micro Standard”