$12.99
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The factory plastic or steel follower in your shotgun's magazine tube gets the job done, but it collects grime and can bind up over time. Strike Industries built this one to run cleaner and last longer. It's machined from 6061-T6 aluminum with a spiral fluting profile down the sides, and that fluting isn't just for looks. As the follower travels up and down the tube it works debris and fouling out of the way, so your rounds keep feeding on a consistent path.
The anodized FDE color does double duty here. The hard anodized surface lets the follower slide smoothly inside the tube with less friction than a bare part, and the bright, high-contrast finish gives you a fast visual check. When you glance down the tube or into the action, that colored follower tells you at a glance whether the shotgun is empty, which is a nice touch for safety checks and press checks in low light.
Strike lists this follower as compatible with a wide range of popular 12-gauge platforms, including the Benelli M1, M2, M3, M4, Super Black Eagle series, Ethos, Legacy, Montefeltro, and Super Sport, plus the Mossberg 500, 590, 930, Maverick 88, and Shockwave, and the Remington 870, 1100, and 11-87, along with the Stoeger M3000. It's a drop-in swap on most standard tubes. Worth knowing before you order: tubes with internal dimples, limiters, ribs, or bumps that retain the factory follower may need those removed first, so give your tube a quick look if you're running a defensive setup with a retention dimple.
For a small part, a good follower punches above its weight. This one is lightweight, high-strength, and a straightforward way to freshen up an older tube or add some visibility to a workhorse scattergun.
It's designed for a broad list of 12-gauge platforms, including the Benelli M1/M2/M3/M4, Super Black Eagle series, Ethos, Legacy, Montefeltro, and Super Sport, the Mossberg 500, 590, 930, Maverick 88, and Shockwave, the Remington 870, 1100, and 11-87, and the Stoeger M3000. It's meant as a drop-in on standard tubes. Some special-edition variants of those models may differ, so it's worth confirming your exact tube.
The spiral flutes running down the follower help push fouling, dirt, and debris out of the way as the part cycles up and down the magazine tube. That keeps the follower moving freely and helps your rounds feed on a consistent path. Strike describes it as a self-cleaning design, which is handy for a part that lives inside a tube you don't clean often.
On most standard 12-gauge tubes it drops right in. If your tube has internal dimples, limiters, ribs, or bumps that hold the factory follower in place, those may need to be removed before this follower will travel freely. Take a quick look inside your tube before ordering if you're not sure.
The high-contrast FDE finish makes it easy to spot the follower when you look into the tube or action, giving you a quick visual confirmation that the shotgun is empty. It pairs well with tan and earth-tone builds too. Function stays the same across colors since the anodized surface still slides smoothly regardless of shade.
| UPC | 793811765908 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SGMAGFOLLOWER12FDE |
| Caliber/Gauge | 12 Gauge |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.