Description
Building a custom G43, G43x, or G48 with your Strike Industries LITESLIDE? This adapter plate solves the footprint compatibility puzzle that catches a lot of builders off guard. The LITESLIDE comes pre-cut for Shield RMSc optics, but what if you want to run something different? Instead of being locked into one platform or forced to modify your slide, this adapter opens up multiple options across four major footprint patterns.
Multi-Footprint Compatibility
The plate supports RMR, C-More, DeltaPoint Pro, and Docter/Noblex footprints, which means you can choose from proven optics like Trijicon RMR and SRO, Holosun HS407C and HS507C, Vortex Razor and Venom, SIG SAUER ROMEO series, and dozens of other quality micro red dots. All the hardware you need for most popular optics comes in the box, including mounting screws and alignment posts in various sizes, plus a Torx tool and threadlocker to ensure your setup stays rock solid.
Engineering for Carry Guns
Weighing just half an ounce and machined from 6061-T6 aluminum, this plate adds virtually nothing to the gun's weight or profile. That matters when you're building a gun meant to be carried all day. Strike Industries keeps the engineering minimal and purposeful, the same approach they take with the LITESLIDE itself. The plate is flat and low-profile by design, keeping your overall sight height reasonable and preserving the whole point of going with a slim, concealable platform in the first place.
Installation and Setup
You get everything needed for the installation process: multiple screw lengths (M3x7mm through M3x11mm in both flat and rounded head styles), small and extra-large alignment posts to dial in different optic dimensions, the Torx tool, and Strike Industries threadlocker to keep everything locked down. This isn't a situation where you need to buy extras elsewhere. The approach is thoughtful engineering that anticipates what builders actually need when they're putting together a custom slide.
Key Specifications
- UPC: 793811766325
- Manufacturer: Strike Industries
- Model Number: G43RMR
- Compatible Firearms: Glock G43, G43x, G48 (Gen 3-5) with LITESLIDE
- Material: 6061-T6 Aluminum
- Weight: 0.50 oz
- Length: 1.85 inches (46.93mm)
- Width: 1.34 inches (26.30mm)
- Height: 0.24 inches (6.00mm)
- Mount Type: C-More, DeltaPoint Pro, Docter/Noblex, RMR Footprint
- Compatible Optic Patterns: RMR, C-More, DeltaPoint Pro, Docter/Noblex
- Optics Supported: Trijicon RMR/SRO, Holosun HS407C/HS507C/HS508T, Vortex Razor/Venom, SIG SAUER ROMEO series, and compatible footprint options
What’s Included
- 1 LITESLIDE for G43 MRDS Adapter Plate
- 2 Adapter plate screws (M3x5mm T10 flat head)
- 3 M3x8mm T10 flat head screws
- 3 M3x9mm T10 flat head screws
- 3 M3x7mm T10 rounded head screws
- 3 M3x10mm T10 rounded head screws
- 3 M3x11mm T10 rounded head screws
- 5 Small alignment posts
- 3 X-Large alignment posts
- 1 Torx T10 tool
- 1 Loctite Threadlocker Blue 243
Frequently Asked Questions
Will this adapter plate work with my standard Glock G43 without the LITESLIDE?
No, this adapter plate is designed specifically for the Strike Industries LITESLIDE for G43, G43x, and G48. It mounts directly to the LITESLIDE's optics cut and will not work with factory Glock slides. If you have a factory G43 MOS, you'll need a different mounting solution designed for that platform.
Does the adapter plate lower my red dot sight and prevent co-witnessing with iron sights?
The adapter plate is minimal in height at just 0.24 inches, but like any adapter plate, it does add a small amount of height over a direct mount. Whether you can still co-witness depends on your specific optic and iron sight combination. Some lower-profile micro red dots may still allow co-witnessing, but you should verify before purchasing if that's critical to your setup.
What optics can I actually mount with this plate?
This plate supports four major footprint patterns: RMR (Trijicon RMR, Holosun HS407C/507C, and similar), C-More, DeltaPoint Pro, and Docter/Noblex. All the necessary mounting hardware for most optics in these categories is included. Check the manufacturer specs of your chosen optic to confirm it matches one of these footprints before ordering.
Is installation difficult, and does it require special tools?
Installation is straightforward. The adapter comes with everything you need including a Torx T10 tool, mounting screws in multiple sizes, and alignment posts. Basic mechanical aptitude and a small screwdriver are all that's required. Strike Industries includes threadlocker, so apply it to the screws during installation to ensure your optic mounting stays secure.




Reviews
There are no reviews yet.