$122.99
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you run an aggressive muzzle brake, you already know the tradeoff. The recoil reduction is great, but the concussion and side blast can make you the least popular person at the range. The Strike Industries Oppressor Universal solves that without forcing you to swap muzzle devices. It slips over almost any brake, comp, or flash hider with a maximum outer diameter of 25mm and redirects the blast and sound forward, so your muzzle device keeps doing exactly what it was built to do.
Internally, the Oppressor uses ported geometry that pulls gas out and pushes it forward through vents, working as a linear brake while it keeps the concussion moving downrange instead of back at your face or the people next to you. Shooters running short barrels and pistol-length ARs tend to notice the biggest difference, since that's where side blast is usually the worst. It won't quiet your gun the way a suppressor does, but it takes a huge bite out of the felt concussion and makes shooting indoors or on a crowded line a lot more pleasant.
The Oppressor Universal mounts to a proprietary Strike Industries 3-lug quick detach base. Once you've installed the base, the correct crush washer, and set your muzzle device timing, the shield itself goes on and off with a push and a slight turn. That means you can run your brake bare when you're out solo and slap the Oppressor on the second you roll up to an indoor bay, no tools required.
This is the LW model, so it pairs a steel core with a 6061-T6 aluminum body and a black anodized finish. At 7.85 ounces it keeps weight off the end of your barrel while still standing up to repeated blast. It's multi-caliber friendly across .223/5.56, .308/7.62, and 9mm, and works with 1/2" and 5/8" threaded barrels. One thing worth checking before you buy: make sure your handguard has clearance at the muzzle, since a long rail can butt right up against the shield.
It's built to slip over almost any brake, comp, or flash hider with a maximum outer diameter of 25mm (0.98"). That covers a huge range of common muzzle devices on 1/2" and 5/8" threaded barrels. The key measurement is that outer diameter, so if your muzzle device fits under that number, you're good.
The Oppressor is a blast shield, not a suppressor, so it won't make your gun quiet. What it does is redirect the concussion and side blast forward while letting your existing muzzle device keep its recoil reduction. Think of it as taming the obnoxious blast without giving up the performance you already paid for.
It mounts to a proprietary Strike Industries 3-lug base that you install once along with the correct crush washer. After that, the shield itself goes on and off with a push and a slight turn, no tools needed. That makes it easy to run bare outdoors and add the shield only when you head to an indoor range or a crowded line.
It can, but you'll want to check clearance first. The shield adds diameter and length at the muzzle, so a long or tight-fitting handguard rail can butt right up against it. Measure the space at the end of your barrel before ordering to make sure it seats cleanly.
| UPC | 793811764864 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BSOPPRESSORUBK |
| Model | |
| Thread Pattern | 5/8"x24 |
You must be logged in to post a review.
Reviews
There are no reviews yet.