Description
Dropping a c-clip into the carpet during a build or barrel swap is a rite of passage no one enjoys. The Strike Industries Ultimate Dust Cover was built to skip that headache entirely. Instead of fighting with a tiny retaining clip and a stiff factory spring, this polymer ejection port cover uses a spring-loaded internal detent rod that lets you snap it on or pop it off in roughly five to ten seconds. It works with .223/5.56 AR-15, M4, and M16 uppers, and the slimmer profile plays nice with billet receivers too.
What Sets the Ultimate Dust Cover Apart
Strike built this one from high-density polymer, so it won't rust, corrode, fade, or bend out of shape the way you'd worry about with a metal door. It tips the scale at around three ounces, and the molded-in designs mean the finish stays put for the long haul. There's a cut-out window on the detent rod that gives you access for quick disassembly, which is the whole reason it goes on and off so fast without armorer tools.
Getting the Fit and Feel You Want
The adjustable detent set screw is the sleeper feature here. As your receiver wears in over the years, you can dial the opening tension up or down with a small flathead so the cover pops the way you like it. Strike's "True Seal" internal lip seats into the port rather than just laying over it, which does a better job keeping dust, sand, and range grime out of your action when the rifle is stowed.
Compatibility Notes Worth Knowing
Most mil-spec and billet uppers take this cover without fuss, and plenty of folks run them across multiple rifles including AR-10 builds. A small number of receivers may need a light touch of sanding near the shell deflector for the cover to swing perfectly free, which is a quick fix if it comes up. Take a minute to seat it correctly during install and you'll get a snug, smooth-operating cover that looks a lot sharper than the plain factory piece.
Key Specifications
- Manufacturer: Strike Industries
- Model: Ultimate Dust Cover (Enhanced)
- Manufacturer Part Number: ARUDCE0122
- UPC: 700598350548
- Product Type: Ejection Port Dust Cover
- Fits: AR-15 / M4 / M16 (.223/5.56)
- Billet Upper Compatible: Yes
- Material: High-Density Polymer
- Finish: Black
- Length: 3.46 in
- Weight: Approx. 3 oz
- Detent: Adjustable set screw for opening tension
- Sealing: True Seal internal lip
- Install Time: About 5 to 10 seconds
What’s Included
- 1x Ultimate Dust Cover
- 1x Spring
- 1x Pin
Frequently Asked Questions
Do I need to remove the barrel nut to install the Ultimate Dust Cover?
No, and that's the biggest draw. The spring-loaded internal detent rod and cut-out window let you install or remove the cover without pulling the barrel nut or handguard. Most people have it seated in well under a minute using nothing more than a small flathead if any tool at all.
Will this Ultimate Dust Cover fit my billet upper?
It should. The enhanced version was made thinner than the original specifically to clear billet receivers along with standard mil-spec uppers chambered in .223/5.56. A handful of receivers may need a light sanding near the shell deflector for the cover to swing completely free, but that's a quick fix if it comes up.
What does the adjustable detent set screw actually do?
It lets you control how much force it takes to open the cover. Using a small flathead to depress the ball detent, you can increase or decrease the tension to match your preference. It's especially handy on older receivers where wear has loosened up the pivot over time.
Does the Ultimate Dust Cover seal better than a factory metal cover?
Strike's True Seal lip is molded to fit down into the ejection port rather than just laying across it, so it does a solid job keeping dust, sand, and grime out of the action while the rifle is stowed. The polymer construction also won't rust, corrode, or fade like a painted metal door can over time.




Reviews
There are no reviews yet.