$14.95
23 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Anyone who has run a drop-in trigger or put serious round counts through an AR knows the frustration of a pin that starts creeping out of the receiver. This Strike Industries kit puts that worry to bed. It swaps your standard mil-spec trigger and hammer pins for a matched pair of S45C steel pins held tight by a single retention clip, so nothing walks or rotates when the gun heats up.
What sets this design apart is the tool-less system. Instead of tiny set screws that back out or vanish into the carpet, the clip snaps into machined slots on both pins and locks them from spinning. No thread locker, no fiddly hardware, no cursing on the bench. When you need to break the gun down for cleaning or troubleshooting, the clip pops off just as easily, which is a real advantage over traditional screw-style anti-walk pins that trap you without the right bit.
The pins measure the standard .154 inch diameter, so they drop right into a mil-spec AR-15 or AR-10 lower without any fitment surprises. Each pin gets a QPQ nitride finish and a polished bearing surface, which does two things: it fights corrosion and wear for the long haul, and it lets your fire control group cycle a little cleaner. Guys running standard trigger groups often notice a smoother pull, and for drop-in trigger packs the extra retention is close to essential.
At right around two tenths of an ounce, these pins add zero meaningful weight to your build. They shine on high round count range guns, competition rifles, and any setup that sees rough handling. It is one of those small, inexpensive upgrades that quietly saves you a headache down the road. If you are assembling a lower or dropping in a new trigger, this is the kind of detail that separates a build that runs from one that gives you trouble.
Yes, the pins are the standard .154 inch diameter and drop into any mil-spec AR-15 lower. They also work in mil-spec AR-10 and AR-308 lowers. If your receiver takes standard trigger and hammer pins, this kit is a direct fit.
No. That is the whole point of the design. The single retention clip snaps into machined slots on the pins to lock them in place, so there are no small set screws to back out and no liquid thread locker required. It goes in and comes out by hand or with basic bench tools.
It does, and drop-in triggers are exactly where anti-walk pins earn their keep. Cassette-style trigger packs benefit from the extra retention since it keeps everything seated and prevents the pins from creeping under heavy fire. Just double-check that your trigger is built for standard .154 pins before installing.
The pins have a polished bearing surface and a QPQ nitride finish that let the fire control group cycle a little smoother. Shooters running standard trigger groups often notice a cleaner feel. It is not a replacement for a full trigger upgrade, but it is a nice bonus on top of the anti-walk security.
| UPC | 708747546866 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SI-AR-AWP |
| Color | Black |
| Model | |
| Product Type | Pin Kit |
You must be logged in to post a review.
Reviews
There are no reviews yet.