Description
Not many weapon lights let you run overt and covert from the same housing, and that is exactly what the Streamlight ProTac Rail Mount VIR Pro is built to do. A three-position head switch drops you from bright white light into 940nm infrared without swapping gear or fumbling in the dark, and a built-in cutoff keeps visible light from firing off by accident while you are running IR. On white, you are looking at 1,100 lumens and 40,000 candela reaching out to a 400-meter beam. On IR, the emitter puts out 2,300mW on high and 600mW on low for use with night vision.
Two Jobs, One ProTac Rail Mount VIR Pro
The idea here is versatility for folks who mostly live in white light but want IR in their back pocket. Instead of running a dedicated illuminator and a separate white light, you get both in a single unit that weighs around 8.2 ounces with CR123A batteries. That keeps things trim enough to run on a carbine or a short-barreled setup without loading up the handguard. TEN-TAP programming lets you set one of three operating programs so the light behaves the way you want it to, whether that is high-only simplicity or a high-low IR setup.
Built to Take a Beating
This is a working light. The body is 6000 series machined aircraft aluminum with a black anodized finish, and the lens is impact-resistant BOROFLOAT glass. It is live-fire tested, rated to two meters of impact resistance, and sealed to IPX7 with the standard push-button cap installed, or IPX4 when you add the remote pressure switch.
Mounting and Power on the VIR Pro
The rail clamp locks straight onto MIL-STD-1913 Picatinny, and the included M-LOK adapter opens it up to M-LOK and M-LOK-compatible handguards. The rotating head lets you tuck the light in close to the rail for a clean profile. This 88138 version runs on two CR123A lithium batteries, giving you 1.5 hours on high white and up to 11 hours on low, with IR running as long as 7.25 hours. The Jack-Cap tail cap gives you push-button operation or a port for the included remote pressure switch, so you can set up activation the way your build calls for.
Key Specifications
- Manufacturer: Streamlight
- Model: ProTac Rail Mount VIR Pro
- Manufacturer Part Number: 88138
- UPC: 080926881389
- White Light Output: 1,100 / 540 / 120 lumens (High / Med / Low)
- Peak Beam Intensity: 40,000 candela
- Beam Distance: 400 meters
- IR Output: 2,300mW high / 600mW low (940nm LED)
- Battery: Two CR123A lithium (included); also accepts SL-B26 rechargeable
- Run Time (CR123A): 1.5 hrs high white to 11 hrs low; up to 7.25 hrs IR
- Mounting: MIL-STD-1913 Picatinny with included M-LOK adapter
- Switching: Jack-Cap tail cap plus head-mounted mode selector; TEN-TAP programmable
- Construction: 6000 series machined aircraft aluminum, black anodized
- Water Rating: IPX7 with push-button; IPX4 with remote switch
- Weight: 8.2 oz with CR123A batteries
- Color: Black
What’s Included
- ProTac Rail Mount VIR Pro light
- Two CR123A lithium batteries
- Remote pressure switch (momentary on)
- Remote retaining clips
- M-LOK mount and mounting hardware
Frequently Asked Questions
Does the ProTac Rail Mount VIR Pro work with night vision?
Yes. It uses a 940nm infrared LED that puts out 2,300mW on high and 600mW on low, so it pairs with night vision devices for covert work. You flip the head-mounted switch from white to IR, and a built-in cutoff keeps the visible light from firing off while you are in IR mode.
What batteries does the 88138 version use?
This SKU ships with two CR123A lithium batteries and runs on them out of the box. It is also multi-fuel capable, so it will run on a single Streamlight SL-B26 USB rechargeable pack if you decide to go that route later. On CR123A cells you get about 1.5 hours on high white light and up to 11 hours on low.
Will it mount to an M-LOK handguard?
It clamps directly to MIL-STD-1913 Picatinny rails, and Streamlight includes an M-LOK adapter in the box for M-LOK and M-LOK-compatible handguards. The rotating head also lets you position the light tight against the rail for a cleaner, lower-profile setup.
How tough is the VIR Pro?
The body is 6000 series machined aircraft aluminum with a black anodized finish, and the lens is impact-resistant BOROFLOAT glass. It is live-fire tested and rated to two meters of impact resistance. Sealing is IPX7 with the standard push-button cap or IPX4 once you add the remote pressure switch.




Reviews
There are no reviews yet.