Description
The Streamlight Stinger LED HL is what you reach for when you need a big blast of light without hauling around something the size of a baton. It puts out 800 lumens on high through a deep-dish parabolic reflector, which means you get a bright center spot backed by a generous wash of peripheral light. That wide beam is the whole point of this one. It's built to light up an area rather than punch a tight beam way out into the distance, so it shines for searching a room, a yard, a work site, or the back of a truck.
What the Stinger LED HL Brings to the Table
Run modes are simple and useful. High gives you 800 lumens with a 310 meter beam for about 1.5 hours, medium drops to 400 lumens for 2.5 hours, and low runs 200 lumens for a full 5 hours when you want to stretch the charge or dial back the glare. There's also a strobe for signaling or disorienting. Everything cycles through a single mid-body push-button switch that Streamlight built for a long service life, so you're not fumbling for controls in the dark.
Built Like a Streamlight Should Be
The body is machined 6000-series aircraft aluminum with a non-slip rubberized grip and an anti-roll ring so it stays put when you set it down. The lens is unbreakable polycarbonate with a scratch-resistant coating, and the whole light carries an IPX4 water-resistant rating along with a 1-meter impact rating. This is the kind of build that holds up to daily duty use, which is exactly why so many folks in law enforcement and industrial work carry the Stinger line.
Charging and Battery Life
Power comes from a 3-cell, 3.6V Ni-MH sub-C battery pack that's rechargeable up to 1,000 times, so you're not constantly buying disposables. This 75430 configuration ships with two charging holders plus AC and DC cords, meaning you can set up a cradle at home and another in the vehicle. The light snaps right into the bracket to charge, and it's compatible with existing Stinger snap-in chargers if you already run them.
Key Specifications
- Manufacturer: Streamlight
- Manufacturer Part Number: 75430
- UPC: 080926754300
- Max Output: 800 lumens
- Output Modes: High 800 / Medium 400 / Low 200 lumens, plus Strobe
- Peak Beam Intensity: 24,000 candela
- Max Beam Distance: 310 meters (1,017 feet)
- Runtime: 1.5 hrs high / 2.5 hrs medium / 5 hrs low
- LED: C4 LED, 50,000-hour lifetime
- Battery: 3.6V Ni-MH sub-C, rechargeable up to 1,000 times
- Body Material: 6000-series machined aircraft aluminum
- Lens: Unbreakable polycarbonate, scratch-resistant coating
- Water Resistance: IPX4, 1-meter impact rated
- Length: 8.41 inches
- Weight: 12.4 oz
- Color: Black
What’s Included
- Stinger LED HL flashlight
- Ni-MH rechargeable battery
- Two charging holders
- 120V AC charge cord
- 12V DC charge cord
- Anti-roll ring
- User manual
Frequently Asked Questions
How bright is the Streamlight Stinger LED HL and how far does it reach?
On high it puts out 800 lumens with a beam distance of about 310 meters, roughly 1,017 feet. It's designed as a wide-beam flood light, so it lights up a large area really well rather than punching a narrow beam to the horizon. Medium and low give you 400 and 200 lumens if you want to save battery or cut down on glare.
What kind of battery does the Stinger LED HL use and how do you charge it?
It runs on a 3-cell, 3.6V Ni-MH sub-C rechargeable pack that's good for up to 1,000 charge cycles. This 75430 version comes with two charging holders plus AC and DC cords, so you can keep a cradle at home and one in the vehicle. The light snaps right into the bracket to charge and works with existing Stinger snap-in chargers too.
Is the Stinger LED HL tough enough for duty or work use?
It's built from machined 6000-series aircraft aluminum with a non-slip rubberized grip and an unbreakable polycarbonate lens. The light carries an IPX4 water-resistant rating and is tested for 1-meter impact resistance. That's why it's a common pick on duty belts and job sites where a light takes a beating.
How do you switch between modes on the Stinger LED HL?
All the modes run off a single multi-function push-button switch located mid-body on the flashlight. You cycle through high, medium, low, and strobe with that one button. It's a simple, intuitive setup that's easy to work in the dark or with gloves on.




Reviews
There are no reviews yet.