Description
Neck tension is one of those small details that separates good handloads from great ones, and this .257 steel bushing is how you take control of it. It drops into RCBS Gold Medal Match Series and MatchMaster neck sizing dies, letting you set precisely how much grip the case neck puts on the bullet instead of leaving it to a one-size-fits-all sizer button. For anyone chasing single-hole groups off the bench or stretching reach out past a few hundred yards, that kind of repeatable tension matters.
The bushing itself is machined from solid steel and self-centering, so it lines up with the case neck for even sizing all the way around. Because it comes in-the-white, meaning bare steel with no coating, you'll want to keep your usual case lube routine going when you run it. Pairing it with high-end brass that has consistent neck wall thickness is where this piece really earns its keep, and turning your necks takes it a step further.
Why the .257 Steel Neck Bushing Changes Your Groups
Using a correctly fitted bushing reduces work-hardening of the case neck brass. That means your brass lasts longer between annealings and trimmings, and more importantly, your neck tension stays consistent from load to load. Consistent tension translates directly into lower velocity spread and tighter groups downrange, which is exactly why benchrest and long-range precision crowds have leaned on this style of changeable bushing die for years.
Sizing Your RCBS .257 Neck Bushing Right
There are two easy ways to land on the correct bushing. Measure the outside neck diameter of a loaded cartridge and subtract .002 to .003 inch, which leaves roughly .001 inch of brass spring-back for proper tension. Or measure the neck wall thickness, multiply by two, add your bullet diameter, then subtract .001 inch. RCBS suggests keeping bushings one to two sizes above and below your target so you have room to fine-tune as you chase the sweet spot.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 81572
- UPC: 076683815729
- Bushing Diameter: .257 in (0.2570)
- Material: Steel (in-the-white / bare steel)
- Design: Self-centering, interchangeable neck bushing
- Compatible Dies: RCBS Gold Medal Match Series and MatchMaster sizing dies
- Quantity: 1 bushing
- Country of Origin: USA
What’s Included
- One (1) RCBS .257 Steel Neck Bushing
Frequently Asked Questions
What dies does the RCBS .257 Steel Neck Bushing fit?
It's designed for use with RCBS Gold Medal Match Series and MatchMaster sizing dies. It works in both full-length and neck-sizing styles of those bushing dies. Keep in mind it is made specifically for the RCBS bushing die system.
How do I know if .257 is the right bushing size for me?
Measure the outside neck diameter of a loaded cartridge and subtract .002 to .003 inch, which gives you proper neck tension after brass spring-back. Alternatively, measure your case neck wall thickness, multiply by two, add your bullet diameter, then subtract .001 inch. RCBS recommends keeping bushings one to two sizes above and below your target so you can fine-tune.
Does the .257 steel neck bushing need case lube?
Yes. Because these bushings come in-the-white, meaning bare uncoated steel, you'll want to stick with your normal case lubrication routine when sizing. Skipping lube on a bare steel bushing is a good way to make the job harder than it needs to be.
Will a bushing actually help my accuracy?
A correctly fitted bushing gives you repeatable neck tension and reduces work-hardening of the case neck brass, which helps extend case life and tighten your groups. You'll see the biggest gains when you pair it with high-quality brass that has consistent neck wall thickness, and turning your necks takes it further. This is why precision and benchrest reloaders have relied on changeable bushing dies for years.




Reviews
There are no reviews yet.