$25.99
13 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you shoot a .32 S&W Long and want brass you can trust load after load, Starline is about as good as it gets. These are new, unfired cartridge cases made in the USA, and they arrive unprimed so you have full control over your powder charge, primer, and bullet selection. Starline has built its reputation on making brass the slow and careful way, and that attention shows up at the loading bench with cases that size cleanly and chamber without fuss.
The .32 S&W Long is a rimmed, straight-wall cartridge that headspaces on the rim, which makes it a forgiving round to reload and a favorite for target work and recreational plinking. It was designed back in 1896 and lives on in plenty of small-frame revolvers. These cases run 0.911 to 0.916 inches in length, right in the sweet spot for the caliber, so you can trim as needed and expect uniform results across the batch.
The .32 S&W Long is essentially a shortened version of the .32 H&R Magnum, and it shares the same rim and case diameters as the shorter .32 S&W and the longer .32 H&R Magnum and .327 Federal Magnum. That means loaded .32 S&W Long rounds can safely be fired in revolvers chambered for .32 H&R Magnum and .327 Federal, giving you some flexibility if you own more than one wheelgun in the family.
Starline brass tends to run concentric and consistent in wall thickness, which pays off in smoother seating and more uniform velocities. For a low-pressure cartridge like the .32 S&W Long, good brass like this will hold up through many reload cycles, making it a smart buy for anyone keeping an older revolver fed or working up accurate target loads.
These are brand new, unfired cartridge cases made by Starline in the USA. They have never been loaded or shot, so you are starting with fresh, uniform brass. They come unprimed, giving you full control over primer, powder, and bullet choice.
Yes. The .32 S&W Long shares the same rim and case diameters as the longer .32 H&R Magnum and .327 Federal Magnum, so loaded .32 S&W Long rounds can safely be fired in revolvers chambered for those cartridges. Just keep in mind it does not work the other way around, since the longer, higher-pressure rounds should never be fired in a gun built for the .32 S&W Long.
Because the .32 S&W Long is a low-pressure cartridge, quality brass like Starline tends to last through many reload cycles when loaded within standard data. Proper sizing, trimming when needed, and reasonable charges all help extend case life. Inspect your brass for splits or loose primer pockets as you go, as you would with any reloading component.
These cases measure 0.911 to 0.916 inches, right in spec for the .32 S&W Long. Since the round headspaces on the rim, it is a forgiving cartridge to load, but it is still good practice to check your lengths and trim as needed for the most consistent results.
| UPC | 810742025885 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 32SWLEUP100 |
| Caliber/Gauge | .32 S&W Long |
| Length | 0.911"-0.916" |
| Product Type | HANDGUN |
| Quantity | 100 Per Bag |
| Style | Small |
You must be logged in to post a review.
Reviews
There are no reviews yet.