$25.99
14 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Starline has been making some of the most trusted reloading brass in the country for over 40 years out of their Sedalia, Missouri plant, and this bag of .32 H&R Magnum cases is a great example of why handloaders keep coming back. These are brand new, unprimed cases, not pulled-down range brass, so you're starting your project with clean, uniform material instead of mystery cases of unknown age. The .32 H&R Magnum is essentially a stretched .32 S&W Long, and it ranks among the most capable .32 caliber handgun cartridges out there, which makes good brass worth the effort when you're chasing accuracy and consistency.
Starline builds these cases to tight tolerances, with controlled wall thickness and strong concentricity. That translates to easier bullet seating, smoother chambering, and ammo that groups the way you'd hope. The brass is produced within SAAMI specifications and gets special heat treat processing, which is a big part of why Starline cases tend to hold up through more firings than a lot of other brass on the market.
These take a small pistol primer and run a case length in the 1.068 to 1.074 inch range. As with any new bulk brass, it's smart to full-length size, trim to a uniform length, and chamfer the case mouths before your first load. Do that bit of prep up front and you'll have a batch of cases that feed and seat the same way every time, which is exactly what you want for a small-bore cartridge where little inconsistencies show up on paper.
Whether you're feeding a Single Seven, a vintage H&R revolver, or a lever gun chambered in this little cartridge, starting with quality Starline brass gives your loads a solid foundation to build on.
These are brand new, virgin Starline cases, not once-fired or pulled-down range brass. That means you're starting with clean, uniform material and all the reloads that fresh brass has to offer. It arrives unprimed and is not loaded ammunition.
The .32 H&R Magnum uses a small pistol primer, and this Starline brass is drilled for exactly that. Just add your primer, powder, and bullet once the cases are prepped.
As with any new bulk brass, it's a good idea to full-length size, trim to a consistent length, and chamfer the case mouths before your first load. Starline holds tight tolerances to begin with, so prep is quick, but doing it ensures the most uniform results on paper.
No. The .32 H&R Magnum case is longer than the .32 S&W Long, so it's meant for firearms chambered specifically in .32 H&R Magnum. A .32 H&R Magnum chamber will typically also accept shorter .32 cartridges, but not the other way around.
| UPC | 837306003813 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 32HREUP100 |
| Caliber/Gauge | .32 H&R Magnum |
| Length | 1.068"-1.074" |
| Product Type | HANDGUN |
| Quantity | 100 Per Bag |
| Style | Small |
You must be logged in to post a review.
Reviews
There are no reviews yet.