Description
The EGW Trijicon RMR Sight Mount is a clean, bolt-on way to put a red dot on your Springfield XD or XDM when the slide isn't already cut for an optic. Instead of paying a gunsmith to mill your slide, you pull the factory rear sight, slide this mount into the dovetail, and you're set up to run an RMR-footprint optic. It's machined from 7075 aluminum with a matte black hardcoat anodized finish, so it shrugs off scuffs, moisture, and the general abuse a carry or range gun sees.
What the Springfield XD RMR Mount Fits
This one is built around the Trijicon RMR footprint, which means it also accepts the Trijicon SRO along with Holosun 407C and 507C optics that share that pattern. It's designed for standard XD and XDM slides that are NOT the optics ready models, and it is not compatible with the RMRcc or the XD(M) 5.25 inch Competition Series. If your slide already has a factory optic cut, you won't need this mount at all. One nice touch owners point out is that the striker retaining pin cutout is placed exactly where it needs to be on the XD, so nothing fights for space.
Installing the EGW RMR Dovetail Mount
Setup is straightforward and reversible. Remove the existing rear sight, seat the mount in the dovetail, snug the set screw, then mount your red dot using the included screws. EGW recommends a dab of blue Loctite on the threads and torquing the mounting screws to roughly 15 inch pounds. The included screws use a 5/64 inch Allen wrench, and a small piece of paper between the optic and the mount during install makes removal easier down the road.
Because it's a dovetail-style mount rather than a permanent modification, you can pull it off and reinstall your factory rear sight anytime you want to go back to irons. It's a smart option for XD owners who want red dot performance without committing to slide milling.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number (MPN): 49523
- UPC: 841370116508
- Firearm Fit: Springfield XD / XDM (non optics ready models)
- Optic Fitment: Trijicon RMR / SRO, Holosun 407C / 507C footprint
- Material: 7075 Aluminum
- Finish: Matte Black Hardcoat Anodized
- Mounting Style: Rear Sight Dovetail
- Overall Length: 1.780 in
- Overall Width: 1.1 in
- Color: Black
- Required Tool: 5/64 in Allen wrench
- Recommended Torque: 15 in/lbs
- Made In: USA
What’s Included
- EGW Trijicon RMR dovetail sight mount
- (2) 6-32 flat head mounting screws
- (1) 6-32 x 3/16 set screw
Frequently Asked Questions
Does the EGW 49523 mount fit optics ready Springfield XD models?
No. This mount is made for standard XD and XDM slides that are not already cut for an optic. If your slide came from the factory with an optic cut, you don't need this adapter since you can mount directly to the slide.
What optics will work with this Springfield XD RMR mount?
It's built around the Trijicon RMR footprint, so it accepts the Trijicon RMR and SRO as well as Holosun 407C and 507C optics that use the same pattern. It is not compatible with the smaller RMRcc, which uses a different footprint.
Do I need a gunsmith to install the EGW RMR mount?
Not at all. You simply remove the factory rear sight, seat the mount in the dovetail, tighten the set screw, and attach your red dot with the included hardware. A 5/64 inch Allen wrench and a bit of blue Loctite are all you need, and it's fully reversible if you want your irons back.
Can I put my original rear sight back on later?
Yes. Because this is a dovetail mount rather than a permanent slide modification, you can remove it and reinstall your factory rear sight whenever you like. That makes it a low-risk way to try a red dot on your XD.





Reviews
There are no reviews yet.