Description
This is the plate you grab when you want to run a Leupold DeltaPoint Pro on a Springfield 1911 DS or Prodigy without any guesswork. Springfield developed the Agency Optic System in collaboration with Agency Arms, and the whole idea behind it is simple: a dedicated plate for each optic footprint so the dot sits exactly where it should instead of perched too high or floating in the wrong spot. The A15B is the DeltaPoint Pro version, machined from solid billet steel and finished in black to match the slide.
Why the A15B Plate Works for the DeltaPoint Pro
Because this plate is cut specifically for the DeltaPoint Pro footprint, you get a direct, tight-tolerance fit that holds zero once you set it. The optic height is dialed in for an intuitive sight picture, which translates to picking up the dot quickly on the draw and staying consistent shot to shot. It also plays nice with the optic manufacturer's supplied screws, so you can mount the DeltaPoint Pro the way Leupold intended.
Built From Billet Steel for the Long Haul
There is a reason these plates feel hefty in hand. Billet steel takes a beating from recoil and keeps the optic locked down over thousands of rounds, whether you are running a match, drilling at the range, or setting up a serious carry gun. The plate carries an integral rear sight as well. Worth knowing up front: with the DeltaPoint Pro installed, the irons are not visible through the plate, so this setup is a dot-primary configuration rather than a co-witness one. That is just how the geometry shakes out with the taller DeltaPoint window.
Getting It on Your 1911 DS
Installation is straightforward. The plate ships with the screws needed to fasten it to the 1911 DS slide, and from there you mount the DeltaPoint Pro to the plate. A little blue threadlocker on the screws and a proper torque check is always smart on any optic job, and this one is no different. If you own a Prodigy or another 1911 DS and you have been eyeing a DeltaPoint Pro, this is the clean way to bring the two together.
Key Specifications
- Manufacturer: Springfield Armory
- Model: A15B AOS Plate
- Manufacturer Part Number: PH5077N-DPP-PLT-RET
- UPC: 706397961343
- Optic Footprint: Leupold DeltaPoint Pro
- Fits: Springfield 1911 DS / Prodigy with AOS cut
- Material: Billet Steel
- Finish: Black
- Rear Sight: Integral
- Attachment: Screw mount
- Mounting Hardware: Included
What’s Included
- A15B AOS mounting plate for DeltaPoint Pro
- Plate mounting screws
Frequently Asked Questions
Which pistols does this AOS plate fit?
It is designed for Springfield 1911 DS models cut for the Agency Optic System, including the Prodigy. As long as your slide has the AOS optic cut, the A15B plate drops right in. It is not meant for standard 1911 slides without the AOS cut.
Does the integral rear sight co-witness with the DeltaPoint Pro?
No. With the DeltaPoint Pro mounted on this plate, the iron sights are not visible through the optic window, so you are running a dot-primary setup. The integral rear sight is part of the plate design, but the DeltaPoint's taller housing sits above the line of the irons. If co-witness is a must-have, you would need a different optic and plate combination.
Does the plate come with everything I need to mount the DeltaPoint Pro?
The plate ships with the screws to fasten it to your 1911 DS slide. The DeltaPoint Pro itself mounts using Leupold's own supplied screws, which are compatible with this plate. A dab of blue threadlocker and a torque check during install is always a good call.
Will this plate hold zero under recoil?
Yes. The billet steel construction and tight-tolerance fit are built to keep the optic locked down, and users report it maintaining zero through extended range sessions. Proper screw torque during installation goes a long way toward keeping things rock solid over the long haul.





Reviews
There are no reviews yet.