0
0

Spikes Tactical R2 Muzzle Brake .223/5.56 1/2×28 Black Nitride

UPC: 815648022174

$52.99

18 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Recoil on an AR-15 is manageable to begin with, but if you want your rifle to sit dead flat through fast strings of fire, the Spikes Tactical R2 gets the job done. This is a purpose-built muzzle brake, not a flash hider trying to moonlight as one. Those big side ports vent gas out to the sides right behind the bullet, counteracting rearward push and keeping the muzzle from jumping. The practical payoff is quicker, more controlled follow-up shots and a sight picture that barely moves between rounds.

What Sets the R2 Brake Apart

Spikes starts with 416 stainless steel and machines the R2 here in the States, then hits it with a black nitride finish. That nitride does more than look sharp against a matte upper. It hardens the surface and shrugs off heat, corrosion, and carbon buildup, which matters when you're running drills and putting real round counts downrange. At roughly 2.25 inches long and around 2.6 ounces, it adds meaningful recoil control without hanging a bunch of extra weight off the end of your barrel or throwing off the balance of a lightweight build.

Fitting the R2 to Your Rifle

The R2 uses the standard 1/2×28 thread pitch, so it drops onto the vast majority of .223 and 5.56 AR barrels without any adapters or fuss. Like most brakes, it needs to be timed so the ports sit level and vent to the sides the way they're designed to. A crush washer or a set of shims will get you there, and shims tend to give you the most precise timing if you're picky about it. Snug it down to spec, confirm the ports are level, and you're ready to load up.

Built to Keep Running

This one carries the Spikes Tactical lifetime warranty, which tells you they stand behind the machining and the finish for the long haul. Between the stainless construction, the hard nitride coating, and a design that's all business, the R2 is the kind of upgrade you bolt on once and stop thinking about. It just works, shot after shot.

Key Specifications

  • Manufacturer: Spikes Tactical
  • Model: R2
  • Manufacturer Part Number: BV1065 / SBV1065
  • UPC: 815648022174
  • Product Type: Muzzle Brake
  • Caliber: .223 Rem / 5.56 NATO
  • Thread Pattern: 1/2×28
  • Material: 416 Stainless Steel
  • Finish: Black Nitride
  • Color: Black
  • Length: 2.25 in
  • Weight: 2.6 oz
  • Porting: Large Side Ports
  • Warranty: Spikes Tactical Lifetime Warranty

What’s Included

  • Spikes Tactical R2 Muzzle Brake

Frequently Asked Questions

Does the Spikes Tactical R2 come with a crush washer or shims?

The R2 typically ships as the brake by itself, so plan on picking up a 1/2×28 crush washer or a shim set for install. Both work well for timing the ports level. If you're chasing the most precise alignment, shims give you the finest adjustment, while a crush washer is the quicker and simpler route.

Will the R2 brake fit my AR-15?

If your barrel has the standard 1/2×28 thread pitch, which is by far the most common on .223 Rem and 5.56 NATO ARs, the R2 threads right on with no adapters. It's a good idea to confirm your barrel's thread pitch before ordering just to be safe. Most factory AR-15 barrels in these calibers will accept it without issue.

How much does the R2 muzzle brake actually reduce recoil?

The R2's oversized side ports redirect gas outward to fight rearward push and muzzle climb, and users report a noticeable drop in felt recoil compared to a standard A2 flash hider. On an already mild-shooting 5.56, that translates to a rifle that stays flat and lets you get back on target fast. Keep in mind that side-porting brakes do send more concussion and noise out to anyone standing beside you.

Does the R2 need to be timed when installing?

Yes. Since the R2 vents gas out the sides, the ports need to sit level for the brake to do its job correctly, which is what timing accomplishes. Use a crush washer or shims to get the ports aligned horizontally, torque it to spec, and double-check the alignment before heading to the range.

Additional information

UPC

815648022174

Manufacturer

Manufacturer Part Number

BV1065

Caliber/Gauge

.223 REM/5.56 NATO

Color

Black

Model

Product Type

Muzzle Brake

Thread Pattern

1/2"x28

Reviews

There are no reviews yet.

Be the first to review “Spikes Tactical R2 Muzzle Brake .223/5.56 1/2×28 Black Nitride”