Description
There's a lot to like about a 14.5 inch AR. You get a rifle that swings faster, clears doorways and truck cabs easier, and shaves real weight off the front end compared to a standard 16 inch gun. The SAINT Victor V2 in this Gear Pac wears a Melonite-finished CMV barrel with a 1:8 twist and a continuous taper profile that helps manage heat and keeps the whole package rigid. The 4-prong flash hider up front is pinned and welded in place, and the mid-length gas system with a taper-pinned low-profile gas block keeps cycling smooth and consistent.
What Makes the Victor V2 a Step Up
Springfield didn't just slap new furniture on the old Victor. The V2 runs a Radian Raptor ambidextrous charging handle, a 45-degree ambi safety, and a QD receiver end plate, so lefties and righties get the same treatment. The trigger is a flat-faced, nickel boron-coated unit that breaks clean for a factory rifle, and the enhanced M16 bolt carrier group uses a 9310 steel bolt that's both high-pressure tested and magnetic particle inspected. B5 Systems handles the furniture with the Enhanced SOPMOD stock, Type 23 P-Grip, and matching trigger guard. The free-floated M-LOK handguard gives you a full-length top rail, seven QD sling cups, and plenty of room for a light and whatever else you like to run.
Everything in the SAINT Victor V2 Gear Pac
This is where the bundle earns its keep. Along with the rifle, you get a Viridian VENTA green dot optic, four 10-round magazines instead of the usual one, and a padded rifle case with Velcro interior straps and exterior mag pouches. Spring-loaded aluminum flip-up sights come installed too, so you can zero the irons, mount the green dot, and start shooting without a single trip to the accessories aisle. At 6 pounds 12 ounces, this Victor makes a strong case as a do-it-all home defense and range rifle straight out of the box.
Key Specifications
- Manufacturer Part Number: STV914556BLCV2B5PAC
- UPC: 706397003876
- Caliber: .223 Rem / 5.56 NATO
- Action: Semi-auto, direct impingement, mid-length gas system
- Barrel: 14.5" CMV, Melonite finish, continuous taper profile, 1:8 twist
- Muzzle Device: 4-prong flash hider, pinned and welded
- Receivers: Forged 7075-T6 aluminum, Type III hardcoat anodized, Accu-Tite tension system
- Bolt Carrier Group: Enhanced M16 with 9310 steel bolt, HPT/MPI, Melonite finish
- Trigger: Flat-faced GI, nickel boron coated
- Handguard: Free-float aluminum M-LOK with SA locking tabs and QD cups
- Stock: B5 Systems Enhanced SOPMOD
- Grip: B5 Systems Type 23 P-Grip
- Charging Handle: Radian Raptor ambidextrous
- Safety: 45-degree ambidextrous
- Sights: Low-profile spring-loaded adjustable flip-up, front and rear
- Weight: 6 lbs 12 oz
What’s Included
- Springfield SAINT Victor V2 5.56 rifle
- Four 10-round magazines
- Viridian VENTA green dot optic
- Padded rifle case with interior Velcro straps and exterior magazine pouches
- Spring-loaded aluminum flip-up front and rear sights (installed)
- Owner's manual
Frequently Asked Questions
What comes in the SAINT Victor V2 Gear Pac besides the rifle?
The Gear Pac adds a Viridian VENTA green dot optic, three extra magazines for a total of four, and a padded rifle case with exterior mag pouches. Springfield bundles it all in the box, so there's no mail-in redemption or waiting around. Combined with the installed flip-up sights, it covers everything you need for a first range trip except ammo.
Can I remove the flash hider on the 14.5 inch Victor V2?
No, the 4-prong flash hider is permanently pinned and welded to the barrel, so it isn't designed to be swapped like a standard threaded muzzle device. That's part of what makes this configuration work, and the trade-off is a noticeably shorter, quicker-handling rifle than a typical 16 inch build. If you plan on running a suppressor or changing muzzle devices, a standard threaded model would be the better pick.
What's different about the Victor V2 compared to the original SAINT Victor?
The V2 brings a handful of meaningful upgrades, including a Radian Raptor ambidextrous charging handle, a 45-degree ambi safety, and a QD receiver end plate. It also wears upgraded B5 Systems furniture with the Enhanced SOPMOD stock and Type 23 P-Grip. The core recipe of forged 7075-T6 receivers, a nickel boron flat trigger, and an enhanced 9310 bolt carrier group carries over.
What ammo shoots best through the 1:8 twist barrel?
The 1:8 twist is a great middle ground that stabilizes everything from 55 grain plinking loads up to 77 grain match bullets. Most people find the sweet spot for accuracy in the 62 to 77 grain range. It handles both .223 Rem and 5.56 NATO pressure loads, so you can feed it whatever is on the shelf.



Reviews
There are no reviews yet.