0
0

Speer 4713 Copper-Plated .400 180 gr Flat Nose Bullets 500 Ct

UPC: 076683047137

$85.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you load a lot of .40 S&W or 10mm and want a projectile that keeps your per-round cost down without turning your range sessions into a lead-fouling chore, the Speer 4713 is a bullet worth keeping on the shelf. Each one is a 180 grain, .400 diameter flat nose with a swaged lead core that's fully wrapped in a copper plate measuring about 0.004 inches thick. That full encapsulation is the whole point here. It cuts down on airborne lead compared to bare lead bullets and keeps your bore cleaner than traditional cast loads, with none of the lubing or smoke that comes along with greased lead.

Why the Speer 4713 Works for High-Volume Loading

This is a plinking and target bullet first and foremost, and it's priced to feed a habit. The flat nose profile punches clean holes in paper, feeds reliably through most pistol actions, and the 180 grain weight sits right in the sweet spot for standard .40 S&W and 10mm practice loads. Speer lists a sectional density of .161 and there's no cannelure, so you'll be setting your crimp based on your bullet seating depth rather than relying on a groove.

A Note on the Speer 4713's .400 Diameter

One detail reloaders appreciate: these are sized at a true .400 rather than the .401 you'll find on some other plated and cast offerings. That slightly tighter diameter tends to chamber and reload easily in a wide range of once-fired brass, which takes some of the guesswork out of case fit. Because the lead is sealed behind copper, these also give folks running polygonal-rifled barrels an option that sidesteps the usual concerns about shooting bare lead through that style of bore.

Bottom line, the 4713 is a straightforward, proven component that's been earning its keep in reloading rooms for decades. These are component bullets only and are not loaded ammunition, so you'll be supplying your own brass, powder, and primers to build them into finished rounds.

Key Specifications

  • Manufacturer: Speer
  • Manufacturer Part Number: 4713
  • UPC: 076683047137
  • Bullet Caliber: .40 Caliber / 10mm
  • Bullet Diameter: .400"
  • Bullet Weight: 180 Grain
  • Bullet Type: Copper-Plated Flat Nose (CPFN)
  • Core Material: Lead
  • Jacket Material: Copper
  • Plating Thickness: 0.004"
  • Sectional Density: .161
  • Cannelure: No
  • Recommended Usage: Target / Plinking
  • Quantity: 500 per box

What’s Included

  • 500 Speer 4713 copper-plated .400 180 gr flat nose bullets (component projectiles only, not loaded ammunition)

Frequently Asked Questions

What calibers can I load with the Speer 4713 bullets?

These are .400 diameter, 180 grain projectiles, which makes them a natural fit for .40 S&W and 10mm Auto practice loads. They work well across a range of pistol platforms chambered in those calibers. Keep in mind these are component bullets, so you'll be assembling your own loads with brass, powder, and primers.

Why is the Speer 4713 sized at .400 instead of .401?

Speer runs these plated bullets at a true .400 diameter, which is slightly tighter than the .401 you'll find on some other plated and cast bullets. Reloaders tend to like that because it chambers and seats easily in a wide variety of once-fired range brass. It takes some of the fuss out of getting consistent case fit.

Does the copper plating help keep my bore cleaner?

Yes. The copper plate fully encapsulates the lead core, which cuts down on airborne lead and keeps your barrel cleaner than running bare cast lead. You also skip the lube and the smoke that come with greased lead bullets, which makes for tidier range sessions.

Does the Speer 4713 have a cannelure?

No, these flat nose bullets do not have a cannelure. That means you'll want to set your crimp based on your seating depth and load data rather than relying on a crimp groove. A light taper crimp is typical for most .40 S&W and 10mm loads using these.

Additional information

UPC

076683047137

Manufacturer

Manufacturer Part Number

4713

Bullet Caliber

.40 Caliber

Quantity

500

Shipping Weight

13.0

Reviews

There are no reviews yet.

Be the first to review “Speer 4713 Copper-Plated .400 180 gr Flat Nose Bullets 500 Ct”