Redding Small Base Body Die 284 Winchester – 74141

Description

Anyone who shoots the 284 Winchester knows it's a fantastic cartridge for reach and efficiency, and getting the most out of your brass means controlling exactly how it's sized. The Redding Small Base Body Die (part number 74141) handles the body and shoulder of your case without ever touching the neck. That means you can pair it with a neck sizing die of your choice and keep tight control over neck tension while this die takes care of restoring body taper and setting proper headspace.

What the 284 Win Small Base Body Die Actually Does

This is a steel die built to full-length resize the case body and bump the shoulder back for proper chambering, with no decapping rod and no internal parts. The small base cut sizes the web area a touch tighter than a standard body die, which is why it's intended for firearms with custom chamberings cut tighter than standard specs, or for brass that has gotten difficult to chamber after repeated firing and neck sizing. If your neck-sized cases are starting to stick a little going into battery, running them through this die brings everything back in line.

Fitting the Body Die Into Your Reloading Routine

A common setup is to neck size with something like a collet or bushing neck die, then use the body die when cases tighten up and need the shoulder bumped a thousandth or two. Because the small base die works the brass harder than a typical sizer, a quality case lube is a must to keep from sticking a case. For the finest control over shoulder bump, these dies pair really well with Redding's Competition Shellholder sets, which let you dial in headspace in small increments without constantly readjusting the die.

The die uses the standard 7/8-14 thread, so it threads right into any common single stage or progressive press. It ships in a protective plastic storage case to keep it clean and protected on the bench between sessions.