Description
Chasing tighter groups usually comes down to the small stuff, and runout is one of those details that separates good handloads from great ones. The Redding Slant Bed Concentricity Gauge lets you spin a case or a loaded round and read exactly how much the neck or bullet is wobbling off center, so you can sort your best ammo and troubleshoot your dies before you ever hit the range.
What sets this one apart is the slanted bed layout. By moving the bearing surface down and away from you, the case rolls easier and gives you a cleaner, more precise read. The dial indicator sits on a fixed vertical stand set at a 30 degree angle, which puts the face right in your line of sight and takes the guesswork out of setup. No fiddling with indicator position means fewer off-center readings and more consistent results session after session.
How the Slant Bed Gauge Reads Your Brass
The cartridge rides on precision stainless steel bearings that make single point contact with the case. Those bearing sliders ride on stainless steel guide ways, so adjusting for different case lengths is a simple slide rather than a chore. The range is wide too, handling anything from a tiny 17 Hornet all the way up to a 408 CheyTac, which means one tool covers your varmint rounds, your match loads, and your big long range stuff.
Set Up and Bench Options for the Redding 26100
This gauge shows up fully assembled with the large one inch dial indicator already in place, so you can start measuring runout the moment you open the box. It rides on non-skid rubber feet for bench stability, or you can use the direct mounting holes to bolt it down permanently. Lefties aren't left out either, since the gauge converts to a left hand arrangement without much fuss. It's built from machined aluminum and stainless steel, and it has the fit and finish you'd expect from a precision piece that earns its spot on a serious reloading bench.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 26100
- UPC: 611760261008
- Cartridge Range: 17 Hornet to 408 CheyTac
- Dial Indicator: 1 inch, 0.001 inch increments (included)
- Bearing System: Precision stainless steel bearings, single point contact
- Guide Ways: Stainless steel with adjustable bearing sliders
- Indicator Sight Angle: Fixed vertical stand at 30 degrees
- Mounting: Non-skid rubber feet or direct mounting holes
- Configuration: Convertible to left hand arrangement
- Material: Machined aluminum and stainless steel
- Country of Origin: United States
What’s Included
- Redding Slant Bed Concentricity Gauge (Model 26100)
- 1 inch dial indicator (0.001 inch), factory installed
- Non-skid rubber feet
Frequently Asked Questions
What does the Redding Slant Bed Concentricity Gauge measure?
It measures case neck and bullet runout, meaning how far off center the neck or seated bullet is as you rotate the case. Reading that runout helps you sort your most concentric ammo and spot problems with your sizing or seating dies. Lower runout generally translates to more consistent accuracy downrange.
Does the Slant Bed Gauge come with a dial indicator?
Yes. It ships fully assembled with a one inch dial indicator reading in 0.001 inch increments already mounted on the fixed vertical stand. You can open the box and start checking rounds right away without buying anything extra.
What cartridges will the Redding 26100 handle?
The gauge accepts any cartridge case from 17 Hornet up to 408 CheyTac. The bearing sliders move along the stainless steel guide ways to adjust for different case lengths, so one unit covers everything from small varmint rounds to large long range cartridges.
Can the Slant Bed Concentricity Gauge be used by left handed reloaders?
It can. The gauge converts to a left hand arrangement without special tools or parts. It also sits on non-skid rubber feet or bolts down through the direct mounting holes, so you can set it up however your bench works best.




Reviews
There are no reviews yet.