$79.90
Out of stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
A multi-caliber suppressor is a great value, but running a 5.56 rifle through a can with an oversized bore leaves performance on the table. The SilencerCo Bravo Front Cap in .223 REM/5.56 NATO fixes that. By closing the exit aperture down to match your caliber, this cap typically knocks another 2 to 5 dB off your suppressor's sound signature. That is a real, hearable difference, and it comes from a part you can swap in a couple of minutes without touching the rest of your setup.
This cap uses SilencerCo's Bravo front cap interface, so it works with the Omega 300, Hybrid 46, Scythe-Ti, and the Bravo MAAD Brake. Hybrid 46 owners get the biggest payoff here. Necking that big .46 bore down to 5.56 lets a do-everything can hang with dedicated 5.56 suppressors, which is a smart way to get more out of the suppressor you already have instead of buying another one. Omega 300 owners pick up a bonus too: swapping the Anchor Brake for this flat cap brings the overall length down from 7.09 inches to 6.06 inches in the direct thread configuration, so you end up with a shorter, better-balanced rifle.
There is nothing complicated about this piece, and that is the point. It is a durable stainless steel flat cap with a matte black finish that blends right in with most rifles and suppressor bodies, and it is made in the USA. Thread it on, confirm alignment like you would with any front-end change, and get back to shooting.
If your suppressor collection leans multi-caliber and your range time leans AR-15, this is one of the cheapest and easiest upgrades you can make. Quieter, shorter, no gunsmithing required. Keep the original cap in your range bag and you can switch back for larger calibers whenever you want.
This cap uses SilencerCo's Bravo front cap interface, so it fits the Omega 300, Hybrid 46, Scythe-Ti, and the Bravo MAAD Brake. If your SilencerCo can accepts Bravo-pattern front caps, this one will thread right on. It replaces the factory front cap or Anchor Brake.
Matching the front cap bore to your caliber typically trims 2 to 5 dB off the sound signature, with the biggest gains coming on multi-caliber cans like the Hybrid 46. Necking that large bore down to 5.56 gets you performance close to a dedicated 5.56 suppressor. Results vary a bit by host rifle, barrel length, and ammo.
On the Omega 300, yes. Swapping the Anchor Brake for this flat front cap drops the overall length from 7.09 inches to 6.06 inches in the direct thread configuration. That is roughly an inch of length and a little weight off the muzzle end of your rifle.
No, this cap has a .224 bore, so it should only be used with .223 REM/5.56 NATO or smaller-diameter projectiles. Firing a larger caliber through it would strike the cap. Just swap back to the appropriate cap for the caliber you are running, which only takes a minute.
| UPC | 816413028070 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | AC5125 |
| Caliber/Gauge | .223 REM/5.56 NATO |
| Color | Black |
| Model | |
| Product Type | Accessory-Silencer Accessories |
| Shipping Weight | 0.0 |
You must be logged in to post a review.
Reviews
There are no reviews yet.