$84.15
10 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Not every suppressor needs a quick detach system. If your Omega 36M, Hybrid 46M, Chimera 300, or Saker ASR lives on one rifle most of the time, the SilencerCo Charlie Direct Thread Mount in M18x1.5 is the smarter way to run it. It converts your Charlie-interface can to a straightforward direct thread setup, which shaves overall length and drops a little weight compared to hanging it off an ASR muzzle device. On a hunting rifle or any dedicated suppressed host, that shorter, lighter package is something you notice every time you shoulder the gun.
The M18x1.5 thread pitch shows up on plenty of European rifles and other metric-threaded barrels, and this mount threads straight onto them with no adapters stacked in between. Fewer parts in the chain means better concentricity, and that matters when a baffle strike is the price of sloppy alignment. SilencerCo machines these from stainless steel with a black oxide finish, so it holds up to heat and carbon without fuss and blends right in with the rest of your can.
Swapping is simple. Pull your existing mount out of the suppressor, thread the Charlie Direct Thread Mount in its place, and spin the whole assembly onto your barrel. Snug it up, check alignment, and you are ready to shoot. It is the kind of part you install once and stop thinking about. SilencerCo offers this mount in several thread pitches, so if you have hosts with different barrel threads, you can pick up a mount for each and move one suppressor across all of them.
At roughly two and a half ounces, this is a small part that makes a real difference in how your rifle balances and handles. For anyone running a fixed-barrel rifle, carbine, or subgun with M18x1.5 threads, it is one of the easiest ways to tighten up your suppressed setup without touching anything else on the gun.
It works with SilencerCo suppressors built on the Charlie mounting interface, including the Omega 36M, Hybrid 46M, Chimera 300, and all Saker ASR models. Just make sure your can uses the Charlie system before ordering, since SilencerCo also makes Alpha and Bravo mounts for other suppressor families.
Going direct thread removes the quick detach hardware from the equation, which shortens the overall length of the suppressor and trims some weight. If your can stays on one host most of the time, you are not giving up anything meaningful by skipping the QD system, and you end up with a simpler, more compact package.
Yes. This version is M18x1.5, but SilencerCo makes the Charlie Direct Thread Mount in several pitches including 1/2×28, 5/8×24, 9/16×24, 11/16×24, 3/4×24, M13x0.75, and M18x1. Match the mount to your barrel threads, and note that M18x1.5 and M18x1 are different pitches, so double check your barrel before buying.
Installation is simple. Remove your suppressor's existing mount, thread the Charlie Direct Thread Mount into the body, then spin the suppressor onto your M18x1.5 barrel and tighten it down securely. Check that everything is snug and aligned before shooting, and give it a quick check during longer range sessions since direct thread cans can loosen with heat cycles.
| UPC | 816413026601 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | AC4748 |
| Model | |
| Product Type | Accessory-Silencer Accessories |
| Shipping Weight | 0.15 |
You must be logged in to post a review.
Reviews
There are no reviews yet.