Description
If you've got a Colt 1911 .22LR Rail Gun with the Walther-made slide and you've been wanting to run a red dot, this EGW mount is the clean way to do it. It replaces the factory rear sight and gives you a stable, low-profile base for a compact reflex optic. No drilling, no tapping, no permanent changes to the slide, which means you can pull it back off and reinstall your iron sight whenever you want.
EGW machines these from 7075 aluminum and finishes them in a matte black Type III hardcoat anodize, so it holds up to regular use and matches most factory slide finishes nicely. It measures right around 1.811 inches long and just under an inch wide, keeping the optic sitting low and close to the bore for a natural sight picture. The dovetail uses a progressive taper, which makes the install a lot less fussy. You drive it in from left to right with the muzzle pointed forward and it seats tight.
What the EGW 49302 Mount Fits
This specific part number is cut for the Colt Rail Gun 1911 .22LR built on the Walther slide, so fitment is the thing to nail down before you order. On the optic side, it carries the Docter footprint, which covers the Vortex Viper, Vortex Venom (open emitter), Burris FastFire, Docter, and Crimson Trace CTS-1200 and CTS-1300 red dots. That's a popular footprint, so you've got plenty of good dot options to choose from.
Setting Up the Viper/Venom Walther Mount
Installation is straightforward for anyone comfortable with a sight pusher or a brass punch. Knock out the factory rear sight, slide the EGW mount into the dovetail, and drop your optic on top using the included screws. EGW recommends torquing the 6-32 red dot mounting screws to 15 in/lbs so your dot stays put under repeated recoil. Made in the USA and backed by EGW's reputation for solid, no-nonsense mounting hardware.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 49302
- UPC: 841370115709
- Fits: Colt Rail Gun 1911 .22LR with Walther slide
- Optic Footprint: Docter / Vortex Viper / Vortex Venom (open emitter) / Burris FastFire
- Material: 7075 Aluminum
- Finish: Matte Black Hardcoat Anodize (Type III)
- Overall Length: 1.811 in
- Overall Width: 0.99 in
- Base Configuration: 1-Piece
- Red Dot Screw Torque: 15 in/lbs
- Country of Origin: USA
What’s Included
- EGW Vortex Viper/Venom sight mount (49302)
- 2 x 6-32 button head cap screws
- 2 x 6-32 flat head cap screws
- Mounting hardware
Frequently Asked Questions
What pistol does the EGW 49302 mount actually fit?
This mount is cut specifically for the Colt Rail Gun 1911 .22LR that uses the Walther-made slide. It installs in the factory rear sight dovetail. Double-check that your slide matches this exact model before ordering, since EGW makes similar-looking mounts for different pistols under different part numbers.
Which red dot sights work with this mount?
It carries the Docter footprint, which fits the Vortex Viper, Vortex Venom (open emitter), Burris FastFire, and Docter sights, along with the Crimson Trace CTS-1200 and CTS-1300. If your dot uses that common footprint, it'll bolt right up with the included screws.
Do I have to modify my slide to install this?
No permanent changes are needed. The mount simply replaces your factory rear sight in the existing dovetail, so there's no drilling or tapping. You can remove it and reinstall your original iron sight anytime you want.
How hard is the EGW Viper/Venom mount to install?
It's a manageable job if you have a sight pusher or a brass punch and a little patience. The dovetail has a progressive taper to ease it into place, and you install it from left to right with the muzzle facing forward. Torque the red dot screws to 15 in/lbs so the optic holds zero under recoil.





Reviews
There are no reviews yet.