0
0

EGW Sight Mount for Vortex Viper/Venom Fits Taurus G2/G3 Black

UPC: 841370117543

$44.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Getting a red dot onto a Taurus pistol usually means either a factory optics-ready slide or an expensive machining job. This EGW mount skips all that. It replaces your factory rear sight and gives you a low-profile platform that accepts any optic built on the Vortex Viper, Vortex Venom (open emitter pre-2025), Burris FastFire, or Docter/Noblex footprint. No permanent slide modification, no gunsmith milling, and if you ever want to go back to irons, you just pull the mount and reinstall your rear sight.

It's machined from 7075 aircraft-grade aluminum and finished in a Type 3 hard coat black anodize, so it holds up to recoil and daily carry wear. The dovetail features a progressive taper, which makes drifting it into place a lot smoother than fighting a tight interference fit the whole way. All the mounting hardware comes in the box, and EGW includes two sets of screws so you're covered whether you're running a Vortex-footprint optic or a FastFire/Docter-style unit.

What the EGW Taurus Sight Mount Fits

This one is model-specific, so matching it to your pistol matters. It fits the Taurus G2S, G2C, G3 (old-style rear sight, not the newer Glock-style cut), PT111 G2, PT140 G2, PT709, PT740, and the TX22. Worth noting: it does not fit TORO (T.O.R.O.) optic-cut slides or factory optics-ready models, since those already have their own mounting system. If your slide has a milled optic cut from the factory, you won't need this piece.

Installing the Viper/Venom Mount

Installation is straightforward if you've drifted a sight before. Drive out the factory rear sight, slide the EGW mount into the dovetail from left to right with the muzzle pointing forward, then set your optic on top. A rear sight pusher tool makes the job cleaner than a punch and hammer. EGW recommends a drop of blue Loctite on the provided screws and torquing them to around 15 inch-pounds. A handy tip is to slip a small scrap of paper between the optic and mount during install to keep Loctite off the optic and make future removal easier. The provided screws use a 5/64-inch Allen wrench.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 49291
  • UPC: 841370117543
  • Color: Black
  • Material: 7075 Aircraft-Grade Aluminum
  • Finish: Type 3 Hard Coat Anodize
  • Optic Footprint: Vortex Viper, Vortex Venom, Burris FastFire, Docter/Noblex
  • Mount Type: Dovetail (rear sight replacement)
  • Number of Bases: 1-Piece
  • Overall Length: 1.811 in
  • Overall Width: 0.99 in
  • Fits: Taurus G2S, G2C, G3 (old-style rear sight), PT111 G2, PT140 G2, PT709, PT740, TX22
  • Hardware Tool: 5/64 in Allen wrench
  • Recommended Torque: 15 in-lbs
  • Origin: Made in USA

What’s Included

  • EGW sight mount (1)
  • 2 Button Head Cap Screws (for Vortex Viper/Venom)
  • 2 Flat Head Cap Screws (for Burris FastFire/Docter)

Frequently Asked Questions

Which Taurus models does this EGW sight mount fit?

It fits the Taurus G2S, G2C, G3 with the old-style rear sight, PT111 G2, PT140 G2, PT709, PT740, and the TX22. It will not fit TORO optic-cut or factory optics-ready slides, since those already have their own mounting setup. Check your rear sight style before ordering to make sure it matches.

What red dot optics work with this mount?

The mount accepts optics built on the Vortex Viper, Vortex Venom, Burris FastFire, and Docter/Noblex footprint. Note that it's designed for the older pre-2025 Vortex Venom and Viper, not the newer versions released in 2025. The optic itself is not included.

Do I need a gunsmith to install the Taurus Vortex mount?

Not necessarily, though it helps to have the right tools. You drift out the factory rear sight and slide this mount into the dovetail from left to right with the muzzle forward. A rear sight pusher tool makes it much easier than using a punch, and EGW suggests a drop of blue Loctite with the screws torqued to about 15 inch-pounds.

Does this mount permanently modify my pistol?

No. It simply replaces the factory rear sight in the existing dovetail, so there's no milling or permanent change to the slide. You can remove the mount and reinstall your original rear sight whenever you want to go back to iron sights.

Additional information

UPC

841370117543

Manufacturer

Manufacturer Part Number

49291

Color

Black

Model

Style

Tactical

Reviews

There are no reviews yet.

Be the first to review “EGW Sight Mount for Vortex Viper/Venom Fits Taurus G2/G3 Black”