Description
If you want a red dot on your M&P but you're not ready to send the slide off for milling, this EGW mount is the answer. It replaces the factory rear sight using the existing dovetail, so your Vortex Viper or Venom sits low and locked in without any permanent cuts to the gun. The whole setup is reversible too, meaning you can pull the mount and drop your original rear sight back in whenever you like.
EGW machines this one from 7075 aluminum with a matte black hardcoat finish, and like the rest of their lineup it's made in the USA. It measures 1.811 inches long and 0.99 inches wide, with a progressive taper on the dovetail that helps it seat correctly during install. Torque the mounting screws to 15 in/lbs with a dab of blue Loctite and you've got a platform that holds zero shot after shot.
What the EGW 49308 Mount Fits
This is the Docter footprint version, so it covers a solid range of popular open-emitter optics. That includes the Vortex Viper and Venom, Burris FastFire series, Docter/Noblex, UTG Reflex Micro Dot, Crimson Trace CTS-1200 and CTS-1300, and select ADE RD3 models. On the pistol side it fits the M&P Full Size, M&P 2.0 Full Size, M&P Compact, M&P 2.0 Compact, M&P Shield, plus the SD9VE and SD40VE.
Installing the Vortex Viper/Venom Mount
This is a press-fit mount, so a sight pusher tool makes the job a lot cleaner, and a lot of folks hand it to a gunsmith to seat it properly in the dovetail. Once it's in, you set the optic on top, lay a small piece of paper between the dot and the mount to keep Loctite off the sight and make future removal easier, then run the included screws. It's a straightforward upgrade that gets you shooting with a dot on a budget-friendly footing.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 49308
- UPC: 841370113934
- Optic Footprint: Docter / Vortex Viper/Venom / Burris FastFire
- Mount Type: Rear Sight Dovetail Replacement
- Material: 7075 Aluminum
- Finish: Matte Black Hardcoat
- Overall Length: 1.811 in
- Overall Width: 0.99 in
- Torque Spec: 15 in/lbs
- Country of Origin: Made in USA
- Compatible Model: S&W M&P, M&P 2.0, Shield, SD9VE, SD40VE
What’s Included
- EGW Vortex Viper/Venom sight mount (49308)
- 2 Button Head Cap Screws (for Vortex Viper and Venom)
- 2 Flat Head Cap Screws (for Burris FastFire and Docter)
- Mounting hardware
Frequently Asked Questions
Do I have to mill my slide to use the EGW 49308 mount?
No. This mount replaces your factory rear sight using the existing dovetail, so there are no permanent cuts or machining to the slide. The whole thing is reversible, meaning you can remove the mount and reinstall your original rear sight whenever you want.
Which red dots fit this Vortex Viper/Venom mount?
It uses the Docter footprint, which covers the Vortex Viper and Venom open-emitter models, the Burris FastFire series, Docter/Noblex, UTG Reflex Micro Dot, and Crimson Trace CTS-1200 and CTS-1300. Select ADE RD3 optics work as well, though those typically need the longer 6-32 x 3/8 screws. Note it does not fit the enclosed-emitter Venom.
Will this mount work on my M&P 2.0 or Shield?
Yes. The 49308 fits the M&P Full Size, M&P 2.0 Full Size, M&P Compact, M&P 2.0 Compact, and the M&P Shield, along with the SD9VE and SD40VE. It's a good option for M&P pistols that did not come optics ready from the factory.
Is installation hard?
It's a press-fit mount, so a sight pusher tool makes seating it in the dovetail much easier and cleaner. Plenty of owners have a gunsmith install it to get it sitting right. Once it's in, you add blue Loctite to the provided screws and torque them to 15 in/lbs.




Reviews
There are no reviews yet.