0
0

EGW Sight Mount for Vortex Viper/Venom – CZ P10C/P10F Black

UPC: 841370116010

$44.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The EGW Sight Mount is a clean way to get a red dot on your CZ P10C or P10F when the slide isn't cut for optics. Instead of sending your gun off to a machinist, you pull the factory rear sight out of the dovetail, slide this mount in, and you've got a ready platform for a Vortex Viper, Vortex Venom, Burris FastFire, or any Docter footprint optic. It's machined in the USA from 7075 aluminum and finished in a matte black hardcoat anodize, so it holds up to real carry and range use.

Why the EGW CZ P10 Mount Works So Well

This one rides lower than a Picatinny rail adapter, which keeps your optic closer to the bore for a more natural sight picture and less of that top-heavy feel. The dovetail has a progressive taper machined into it, so getting it seated during install is smoother than fighting a straight-cut mount. Because it uses your existing rear sight dovetail, there's no permanent change to the gun. Pop the mount off and drop your iron sight back in whenever you want.

Fitment and Optic Compatibility

The mount covers a wide range of Docter footprint red dots including the Vortex Viper, Vortex Venom (open emitter), Burris FastFire 1 through 4, Docter, Crimson Trace CTS-1200 and CTS-1300, and several ADE and UTG reflex models. Worth knowing up front: this is built for the standard CZ P10C and P10F. It is not meant for the optics ready versions of those pistols since those already have a cut slide.

Install Notes for the EGW Sight Mount

Mounting hardware comes in the box. You get button head screws for the Vortex Viper and Venom, and flat head screws for the Burris FastFire and Docter optics, so you use the right pair for whatever you're running. EGW recommends a drop of blue Loctite and torquing the mounting screws to 15 in/lbs. The screws take a 5/64 inch allen wrench, and the set screw when used takes a 1/16 inch wrench. It's a straightforward job most folks can knock out at the bench in a few minutes.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 49329
  • UPC: 841370116010
  • Fits: CZ P10C / P10F (non optics ready)
  • Optic Compatibility: Vortex Viper, Vortex Venom, Burris FastFire, Docter footprint
  • Material: 7075 Aluminum
  • Finish: Matte Black Hardcoat Anodized
  • Color: Black
  • Overall Length: 1.811 in
  • Overall Width: 0.99 in
  • Mount Type: Dovetail (replaces factory rear sight)
  • Torque Spec: 15 in/lbs
  • Wrench Size: 5/64 in (mounting screws), 1/16 in (set screw)
  • Country of Origin: USA

What’s Included

  • EGW Vortex Viper/Venom sight mount
  • 2 Button Head Cap Screws (for Vortex Viper/Venom)
  • 2 Flat Head Cap Screws (for Burris FastFire/Docter)
  • 1 Set Screw

Frequently Asked Questions

Will this EGW mount fit my optics ready CZ P10C or P10F?

No. This mount is designed for the standard CZ P10C and P10F that do not have a factory optic cut. The optics ready versions already have a milled slide, so this dovetail mount is not meant for them.

Which red dots work with this sight mount?

It's built around the Docter footprint, which covers the Vortex Viper, Vortex Venom (open emitter), Burris FastFire 1 through 4, Docter, and Crimson Trace CTS-1200 and CTS-1300. Several ADE and UTG reflex models fit as well. The included button head screws are for the Vortex optics and the flat head screws are for the FastFire and Docter.

Do I have to modify my CZ P10 slide to use this?

Not at all. You remove the factory rear sight and slide this mount into the existing dovetail, so there's no permanent change to the gun. If you ever want to go back to irons, you just pull the mount and reinstall your rear sight.

Is mounting hardware included and what tools do I need?

Yes, the screws come in the box. The mounting screws take a 5/64 inch allen wrench and the set screw takes a 1/16 inch wrench. EGW recommends a dab of blue Loctite and torquing the mounting screws to 15 in/lbs.

Additional information

UPC

841370116010

Manufacturer

Manufacturer Part Number

49329

Color

Black

Model

Style

Tactical

Reviews

There are no reviews yet.

Be the first to review “EGW Sight Mount for Vortex Viper/Venom – CZ P10C/P10F Black”