Description
Running a red dot on a wheelgun used to mean sending the frame off for machine work. This EGW mount skips all that. It drops right into the rear sight dovetail on your Smith & Wesson revolver, giving you a stable platform for a Vortex Razor or compatible optic without permanently altering the gun. The mount is CNC machined from 7075 aluminum and finished in a Type III matte black hardcoat anodizing, so it shrugs off recoil and holds up to range time and carry wear.
What the EGW Vortex Razor Sight Mount Fits
This mount is built for the C-More footprint family, which covers the Vortex Razor, C-More RTS and STS, and the Sig Sauer Romeo 3 Max. On the gun side, it fits Smith & Wesson K, L, N, and X frame revolvers that are drilled and tapped from the factory. That last part matters: before you order, open the cylinder and check the top rib for through holes that are drilled and tapped. If your revolver doesn't have them, a qualified gunsmith can drill and tap the top strap to the standard S&W pattern so the mount will seat correctly.
Installing the S&W Revolver Red Dot Mount
Installation is straightforward. You pull the factory rear sight, set the EGW mount into the dovetail, then bolt your optic down using the supplied screws. EGW recommends a dab of blue Loctite on the mount screws and torquing them to 15 in/lbs. The included hardware uses a 5/64" allen wrench, and a small piece of paper between the optic and the mount makes future removal cleaner. The nice part is nothing is permanent. You can pull the mount and reinstall your original rear sight whenever you want.
The mount measures 1.831 inches long and 1.062 inches wide, keeping the optic low and centered over the bore for a natural sight picture. It's a clean, reversible way to get a modern red dot onto a classic revolver.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 49438
- UPC: 841370113019
- Fits Firearm: S&W K, L, N, X Frame Revolvers (drilled and tapped)
- Optic Compatibility: Vortex Razor, C-More RTS/STS/STS2, Sig Romeo 3 Max
- Mount Type: Dovetail (replaces rear sight)
- Material: 7075 Aluminum
- Finish: Type III Matte Black Hardcoat Anodized
- Overall Length: 1.831 in
- Overall Width: 1.062 in
- Mounting Hardware: (2) 8-32 screws included
- Tool Required: 5/64" allen wrench
- Recommended Torque: 15 in/lbs
- Color: Black
- Origin: Made in USA
What’s Included
- EGW Vortex Razor sight mount for S&W revolver
- (2) 8-32 mounting screws
Frequently Asked Questions
Which optics work with this EGW Vortex Razor sight mount?
The mount uses the C-More footprint, so it accepts the Vortex Razor, C-More RTS, STS and STS2, and the Sig Sauer Romeo 3 Max. These all share the same hole and pin pattern. Just confirm your red dot is one of those models before ordering.
How do I know if my S&W revolver will accept this mount?
This mount only fits K, L, N, and X frame Smith & Wesson revolvers that are drilled and tapped from the factory. Open the cylinder and look at the rib on top of the barrel for drilled and tapped through holes. If your gun doesn't have them, a gunsmith can drill and tap the top strap to the standard S&W pattern to make it work.
Does installing this mount permanently modify my revolver?
No. The mount simply replaces the factory rear sight in the existing dovetail. You can remove it and reinstall your original rear sight at any time, which makes it a nice reversible upgrade.
What tools and hardware do I need to install it?
The mounting hardware comes in the box, and the screws take a 5/64" allen wrench. EGW recommends applying blue Loctite to the screws and torquing them to 15 in/lbs. Placing a small piece of paper between the optic and the mount during install makes future removal easier.




Reviews
There are no reviews yet.