0
0

EGW Vortex Razor Sight Mount for Ruger Mk I-IV, P85, P90-95

UPC: 841370113033

$44.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've been wanting to run a red dot on your Ruger rimfire or P-series pistol without drilling and tapping the receiver, this EGW mount is the clean way to do it. It drops into the factory rear sight dovetail, so there's no permanent modification to your gun and you can swap the iron sight back in whenever you want. The whole point here is a solid, repeatable mounting surface that puts your optic as low as possible for a quick, intuitive sight picture.

What the EGW Vortex Razor Mount Fits

This specific model covers the Ruger auto pistol lineup: the Mark I, Mark II, Mark III, Mark IV, 22/45, P85, P90-95, and P97. On the optic side, it's cut for the Vortex Razor red dot, the C-More STS, STS2, and RTS2, and the Sig Sauer Romeo 3 and Romeo 3XL. Worth noting, it does not fit the Vortex Venom or Viper, and it's not meant for the Ruger 5.7 or the P89, so double-check your model and your dot before ordering.

Built Tough, Mounts Low

EGW machines these from 7075 aluminum and finishes them in a Type III matte black hardcoat anodize, which is about as durable as it gets for a part this size. It measures right around 1.83 inches long and 1.06 inches wide, keeping things compact on top of the slide. The dovetail features a progressive taper that makes install smoother while still locking in tight once it's seated.

Getting the EGW Mount Installed

Installation is straightforward and most folks have it done in a few minutes. Drift out your factory rear sight, slide the mount into the dovetail from left to right with the muzzle facing forward, then set your optic in place. The kit comes with two 8-32 button head screws and two 8-32 set screws, and EGW recommends a dab of blue Loctite with the screws torqued to about 15 inch-pounds. A 5/64 allen wrench handles the hardware. Due to normal manufacturing tolerances between guns, a little light fitting is sometimes needed, but shooters consistently praise how solid and stable these mounts feel once they're on.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 49440
  • UPC: 841370113033
  • Fits Firearms: Ruger Mk I, Mk II, Mk III, Mk IV, 22/45, P85, P90-95, P97
  • Optic Fitment: Vortex Razor, C-More STS/STS2/RTS2, Sig Romeo 3/3XL
  • Material: 7075 Aluminum
  • Finish: Matte Black Type III Hardcoat Anodized
  • Overall Length: 1.831 in
  • Overall Width: 1.062 in
  • Mounting Style: Rear Dovetail, 1-Piece
  • Mounting Hardware: (2) 8-32 Button Head Screws, (2) 8-32 Set Screws
  • Tool Required: 5/64 in Allen Wrench
  • Color: Black

What’s Included

  • EGW Vortex Razor dovetail sight mount
  • (2) 8-32 button head screws
  • (2) 8-32 set screws

Frequently Asked Questions

Will this EGW Vortex Razor mount fit my Ruger Mark IV?

Yes, this model is made for the Ruger auto pistol family, which includes the Mark I through Mark IV, the 22/45, and the P85, P90-95, and P97. It installs in the rear sight dovetail, so no drilling or tapping is needed. Just confirm you have one of those models before ordering.

Does this mount work with a Vortex Venom or Viper?

No, this mount is cut specifically for the Vortex Razor footprint, along with the C-More STS, STS2, RTS2 and the Sig Romeo 3 and 3XL. The Venom and Viper use a different footprint and need a separate mount. Match your optic to the mount footprint and you'll be good to go.

How do I install the EGW Vortex Razor sight mount?

Drift out your factory rear sight, then slide the mount into the dovetail from left to right with the muzzle pointing forward. Set your optic on top, apply blue Loctite to the included screws, and torque them to around 15 inch-pounds with a 5/64 allen wrench. Most people have the whole job wrapped up in just a few minutes.

Can I put my iron sights back on later?

Yes, that's one of the nice things about a dovetail mount. Since it replaces the rear sight without any permanent changes to the gun, you can pull the mount off and reinstall your factory rear sight whenever you want. Nothing about the install is permanent.

Additional information

UPC

841370113033

Manufacturer

Manufacturer Part Number

49440

Color

Black

Model

Style

Tactical

Reviews

There are no reviews yet.

Be the first to review “EGW Vortex Razor Sight Mount for Ruger Mk I-IV, P85, P90-95”