Description
If your SIG P320 came with the original Romeo1 factory cut but you want to run a Vortex Venom instead, this EGW adapter plate bridges that gap. It lets you mount a Venom on P320 RX and X-Five slides that were machined for the Romeo1 footprint, so you aren't stuck sending the slide out for a milling job or settling for an optic you don't want. EGW machines these from 7075 aircraft-grade aluminum and finishes them with a matte black hardcoat, so it holds up to recoil and daily carry without looking beat up.
How the P320 Romeo to Venom Plate Mounts
Installation is straightforward if you've done any optic work before. The rear sight comes out of the dovetail, and the EGW mount takes its place. From there the Venom sits directly on the plate using the two provided 6-32 button head screws. EGW recommends blue Loctite on the screws and torquing them to 15 in/lbs. A handy trick from their own instructions: slip a thin piece of paper between the optic and the plate while torquing to keep Loctite off the dot and make future removal easier.
Fitment Notes for the SIG P320 Venom Adapter
Accuracy matters here, so read the fitment carefully. This plate works with SIG P320 RX and P320 X-Five models cut for the original Romeo1. It does not fit the M17, slides cut for the Romeo1 Pro, or the P320 X-Five Legion. Newer P320 RX slides ship with the Romeo1 Pro cut, so if you're unsure which one you have, it's worth confirming before ordering. It's also Venom-specific and is built around the standard Vortex Venom footprint.
The plate measures 1.775 inches long and .99 inches wide, keeping the optic sitting low and compact over the slide. It's a clean, affordable way to get the dot you want on a Romeo1-cut P320 without any gunsmithing.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- MPN: 49200
- UPC: 841370111961
- Material: 7075 Aircraft-Grade Aluminum
- Finish: Matte Black Hardcoat / Grade III Anodizing
- Color: Black
- Optic Fitment: Vortex Venom
- Firearm Fitment: SIG P320 RX & X-Five (Original Romeo1 Cut)
- Overall Length: 1.775 in
- Overall Width: .99 in
- Mounting Hardware: (2) 6-32 Button Head Screws
- Torque Spec: 15 in/lbs
- Mounting Location: Slide (Rear Sight Dovetail)
What’s Included
- EGW SIG P320 RX/X-Five Romeo to Vortex Venom adapter plate
- (2) 6-32 button head mounting screws
Frequently Asked Questions
Which SIG P320 models does this Romeo to Venom plate fit?
It's made for the SIG P320 RX and P320 X-Five that came with the original Romeo1 factory optics cut. It does not fit the M17, slides cut for the Romeo1 Pro, or the P320 X-Five Legion. Newer P320 RX slides are often cut for the Romeo1 Pro, so check your slide before ordering if you're unsure.
What red dot does this adapter plate work with?
This plate is built specifically for the Vortex Venom footprint. It is not designed for the enclosed-emitter Venom micro red dot, so stick with the standard open-emitter Venom for a proper fit.
Do I have to remove my rear sight to install the P320 Venom plate?
Yes. The rear sight is removed from the dovetail and the EGW mount takes its place. The Venom then sits on the plate using the included screws, which should get blue Loctite and be torqued to 15 in/lbs.
Will this work on an optics-ready SIG that isn't cut for the Romeo1?
No. This plate only works on slides with the original Romeo1 cut. If your slide is milled for a different footprint like the Romeo1 Pro, this specific plate won't line up, so matching the cut is the key to getting it installed correctly.




Reviews
There are no reviews yet.