0
0

Sig Sauer 716i Tread 3-Chamber Compensator 5/8×24 7.62×51 NATO

UPC: 798681643691

$62.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 716i Tread runs a lightweight direct impingement system that makes it easy to handle for a 7.62 rifle, and the right muzzle device is what really settles it down when you're sending rounds downrange. This is the factory Sig Sauer compensator built specifically for that platform, using a three-chamber layout to redirect gas and counteract the two things every .308 shooter notices: felt recoil and muzzle climb. It's an OEM part, so you know it's cut to the same standard as the rifle it came off of.

What the 716i Tread Compensator Does at the Muzzle

The three-chamber design vents propellant gas in stages, pushing back against recoil forces and keeping the front end from jumping up between shots. In practical terms that means the rifle tracks flatter, your sights come back on target quicker, and follow-up shots feel a lot more controlled. It's a noticeable difference during longer range sessions where the recoil of full-power 7.62 starts to wear on you. The black finish is durable and blends in with just about any modern rifle build.

Fitment and Threading on the 716i Tread Compensator

This unit uses a 5/8×24 thread pitch, which is the standard for .308 and 7.62 NATO barrels. That makes it a natural fit on the 716i Tread, the SIG716, and the 716G2, but it'll also thread onto any other 7.62 rifle running the same 5/8×24 pattern. So whether you're replacing a device, finishing a custom build, or just upgrading what came on your rifle, it drops on without any special gunsmithing.

If you're chasing a good balance of real recoil reduction without a ton of extra noise or side blast, this compensator hits that middle ground well. It does its job, it's built by Sig, and it fits a wide range of 7.62 platforms beyond the one it was designed for.

Key Specifications

  • Manufacturer: SIG SAUER
  • Model: 716i Tread
  • Manufacturer Part Number: 8900447
  • UPC: 798681643691
  • Product Type: 3-Chamber Compensator
  • Caliber: 7.62×51 NATO / .308 Win
  • Thread Pattern: 5/8"x24
  • Design: 3-Chamber
  • Finish: Black
  • Shipping Weight: 0.16 lb

What’s Included

  • Sig Sauer 716i Tread 3-chamber compensator

Frequently Asked Questions

Will the 716i Tread compensator fit rifles other than the 716i?

Yes. While it's built specifically for the Sig 716i Tread, it uses a standard 5/8×24 thread pitch, so it fits the SIG716, 716G2, and any other 7.62 NATO or .308 rifle running that same threading. As long as your barrel is threaded 5/8×24, you're good to go.

Does the 716i Tread compensator come with a crush washer?

Sig's factory listing describes this as the compensator itself, and reports on what ships in the box have varied between sellers. To be safe, plan on having a 5/8×24 crush washer or shim kit on hand for installation so you can time it properly. It's an easy add and worth having ready before you start.

How much recoil reduction can I expect from this compensator?

The three-chamber design redirects gas to fight both felt recoil and muzzle rise, so you'll notice the rifle staying flatter and coming back on target faster. It won't feel like a rimfire, but it takes a real bite out of full-power 7.62. It's a solid middle ground that cuts recoil without cranking up the noise and side blast the way some aggressive brakes do.

Is this a genuine Sig Sauer factory part?

Yes, this is an OEM Sig Sauer compensator, part number 8900447, the same one built for the 716i Tread platform. Going with the factory unit means it's machined to Sig's spec and matches the rifle it was designed for. That OEM fit and finish is a big draw for a lot of 716i owners.

Additional information

UPC

798681643691

Manufacturer

Manufacturer Part Number

8900447

Model

Shipping Weight

0.16

Thread Pattern

5/8"x24

Reviews

There are no reviews yet.

Be the first to review “Sig Sauer 716i Tread 3-Chamber Compensator 5/8×24 7.62×51 NATO”