$799.99
28 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The P365 Fuse sits in a category all its own. Sig Sauer took the slender, proven P365 platform and pushed it further than anyone expected: longer barrel, extended sight radius, removable magwell, and a slide milled from the factory for an optic. The result is a 9mm that carries like a compact but performs like something much larger. At just 1.1 inches wide and 7.2 inches overall, it does something few pistols manage well: stays thin enough to conceal comfortably while giving you the control and accuracy that usually requires a full-size gun on your hip.
The 4.3-inch carbon steel barrel with DLC finish is the centerpiece here. That extra length over the standard P365 and XL variants means better velocity from defensive 9mm loads, a longer sight radius for improved accuracy, and a more stable shooting platform. Trigger pull averages right around 5 pounds with the nickel-plated flat-faced trigger, which has a clean break and a feel that gets better the more rounds you put through it. The optic cut follows the Shield RMSc footprint, so popular red dots mount up without adapters. If you prefer to run irons only, the factory fiber optic front and black serrated rear are a solid setup as-is.
The polymer LXG grip module uses a laser-stippled honeycomb texture that grips well without being abrasive on the draw. It ships with small, medium, and large backstraps so you can dial in the fit, and the removable magwell makes a real difference for fast reloads on the range. The undercut trigger guard lets you get a high, secure grip naturally, and the 1913 accessory rail under the dustcover has plenty of real estate for a compact weapon light. This is the kind of gun where the ergonomics were clearly thought through, not just bolted on.
Because the Fuse is built on the P365 FCU, it plugs into the entire P365 aftermarket ecosystem. Grip modules, triggers, slides, and barrels from the platform are broadly compatible, which makes this an excellent base if you like to customize. Holster selection is worth noting: the longer slide means standard P365 XL holsters may not fit correctly, but P365 XMacro-sized holsters with an open bottom generally work well. This specific configuration ships with three 10-round steel magazines, making it the right package for areas where higher-capacity mags are restricted.
The P365 Fuse slide is milled from the factory for the Shield RMSc footprint, which is one of the most common compact red dot footprints on the market. That means popular optics like the Holosun 507K, Shield RMSc, and Sig Romeo-X all mount directly without needing a separate adapter plate. The factory iron sights are set at a height that allows co-witnessing with low-profile optics like the Romeo-X.
Not reliably. The Fuse has a longer slide than the XL, which can cause fit and retention issues in holsters cut specifically for that model. Most P365 XMacro-sized holsters with an open bottom work well as an alternative. If you plan to carry the Fuse daily, it is worth picking up a holster molded specifically for this model to ensure proper trigger guard coverage and a clean draw.
No, the P365 Fuse does not have a manual safety. Like most modern striker-fired carry pistols, it relies on internal passive safeties built into the fire control unit. This is a deliberate design choice from Sig Sauer and is common across the P365 platform. Shooters transitioning from manual-safety pistols will want to adjust their training and holster selection accordingly.
The standard P365 runs a 3.1-inch barrel, the XL and XMacro step up to 3.7 inches, and the Fuse goes to 4.3 inches. That extra length translates to better velocity from defensive hollow points, a 6-inch sight radius for improved accuracy potential, and a more settled recoil impulse. For a pistol you are still concealing, it is a meaningful upgrade in shootability without a drastic increase in overall size.
Yes. The Fuse is reverse-compatible with standard P365 17-round and 21-round magazines, which is great news for anyone already invested in the platform. This version ships with three 10-round steel magazines. The modular P365 FCU also means the Fuse shares triggers, grip modules, and many other components with the broader P365 family.
Real-world testing across multiple reviews consistently puts the trigger pull on the Fuse at approximately 4.5 to 5 pounds. The nickel-plated flat-faced trigger has a roughly half-inch of travel before the break, with most of the take-up happening in the last quarter inch of that movement. The trigger tends to smooth out noticeably with use, and dry-fire practice helps get it to where it feels best.
| UPC | 798681698738 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 365XF-9-BFO-10 |
| Action | |
| ATF Type | Pistol |
| Barrel Length | 4.3" |
| Caliber/Gauge | 9mm |
| Capacity | 10 + 1 |
| Color | Black |
| Length | 13.4500 |
| Magazine Included | 3 x 10-Round |
| Model | |
| Number of Magazines | 3 10 rd. Mags |
| Package Height | 3.0 |
| Package Width | 9.8 |
| Product Type | Semi-Auto Pistol |
| Safety | No Manual |
| Shipping Weight | 3.3 |
| Sights | FS: F.O. | RS: Black Serrated |
| Sights Type | Fixed Sights |
| Slide Description | Optic Ready/Serrated |
| State Restriction (CA) | NO DIRECT SHIP TO CALIFORNIA |
You must be logged in to post a review.
Reviews
There are no reviews yet.