Description
Sig Sauer built the Hexium line for the way modern gas guns are set up and shot, and the 5.56 titanium model is the sweet spot of the lineup. The core is additively manufactured as a single monolithic piece of titanium, which means no internal welds to fail when things get hot and no wasted weight anywhere in the design. The whole can comes in at just 11 ounces and 6.2 inches long with a 1.75 inch diameter, so it disappears on the end of a carbine instead of turning your rifle into a boat anchor.
What the Hexium 556 Does for Your Gas Gun
The internal geometry is where the 3D printing pays off. Sig designed flow paths you simply cannot machine the traditional way, and the result is low back pressure with quiet, clean tone. Less gas coming back through the receiver means a cleaner gun, softer bolt cycling, and a lot less of that suppressed AR face blast that ruins long range sessions. Point of impact stays consistent too, so you can zero once and trust it.
Mounting the Hexium 5.56 Ti Your Way
Out of the box it ships with a steel 1/2×28 direct thread mount, which covers just about every standard 5.56 barrel out there. Underneath that, the can uses the industry standard 1.375×24 HUB pattern, so if you prefer a quick detach setup or already run HUB mounts on other rifles, swapping is simple. Up front, the tool-less modular end cap system lets you change caps to tune sound and back pressure or add accessories down the road.
Built to Take Abuse
The exterior wears Sig's signature hexagonal pattern under high temp black Cerakote, which looks sharp and shrugs off corrosion and heat. The weld-free titanium core holds up to rapid fire strings and hard use without complaint, and Sig backs the Hexium with their Infinite Guarantee, no receipts or warranty cards required. For duty carbines, precision ARs, or just high volume range days, this one earns its spot on the muzzle.
Key Specifications
- Manufacturer: Sig Sauer
- Model: Hexium 556
- MPN: HEXIUM556
- UPC: 798681731671
- Caliber Rating: .223 Rem / 5.56 NATO
- Core Material: 3D Printed Titanium (Monolithic)
- Overall Length: 6.2 in
- Diameter: 1.75 in
- Weight: 11 oz
- Mount Type: HUB Compatible (1.375×24) Direct Thread Steel Mount
- Thread Pitch: 1/2×28
- End Cap: Tool-less Modular Accessory Mounting System
- Finish: Black Hi-Temp Cerakote, Hexagonal Pattern
- Warranty: Sig Sauer Infinite Guarantee
What’s Included
- Sig Sauer Hexium 556 titanium suppressor
- 1/2×28 HUB direct thread steel mount (installed)
- Modular front end cap
Frequently Asked Questions
Is the Sig Sauer Hexium 556 HUB compatible?
Yes. The Hexium 556 uses the industry standard 1.375×24 HUB thread pattern, so you can run the included 1/2×28 direct thread mount or swap in a quick detach HUB mount from Sig or other manufacturers. That makes it easy to move the can between rifles with different muzzle devices.
How does the low back pressure design help on an AR-15?
The 3D printed core uses flow optimized internal geometry that sends less gas back through the action. On a direct impingement AR that means less gas in your face, a cleaner running gun, and softer cycling during rapid fire. It also helps the rifle stay reliable without retuning your gas system in most cases.
What is the difference between the Hexium 556 Ti and the Inconel version?
The Hexium line includes three titanium models and one Inconel steel model rated for 5.56 NATO. This titanium version is the lightweight option at just 11 ounces, ideal for keeping a carbine handy and balanced. The Inconel version trades some weight for even greater durability under extremely high round counts.
Will the Hexium 556 shift my point of impact?
Point of impact shift is minimal and repeatable with this can. The monolithic printed core and precise taper mount interface keep alignment consistent every time you install it, so once you confirm your suppressed zero it stays put. Removing and reattaching it should bring you right back to the same zero.


Reviews
There are no reviews yet.