Description
The Sierra MatchKing 6.5mm (.264) 150 grain Hollow Point Boat Tail is the bullet Sierra built to push past the old 147 grain ceiling in .264 caliber. With a G1 ballistic coefficient of .713 and a sleek 27-caliber elongated ogive, this projectile holds velocity and bucks wind in a way that lighter 6.5mm bullets just can't match once you stretch things out past the 600 yard line. It carries a sectional density of .307, which translates to the kind of downrange energy retention and stability that distance work demands.
What Sets the 6.5mm 150 gr MatchKing Apart
Everything about the MatchKing line comes down to accuracy. These bullets are drawn with very thin jackets held to a concentricity standard of up to .0003 inch maximum variation, and weight is kept within plus or minus 0.3 grain. The hollow point features a small meplat created through a final pointing operation, which trims drag and bumps up that already impressive BC. There's also a smart detail in the design: the bearing surface to ogive junction uses the same 1.5 degree angle found in many match chamber throats, which helps the bullet line up with the bore for consistent seating and release.
Loading the 150 gr 6.5mm SMK
This is a long bullet, and twist rate matters. Sierra calls for a barrel twist of 1 in 7.5 inches or faster to fully stabilize it, though plenty of handloaders report good results in 1:8 barrels running it at competition velocities. It's a natural fit for the 6.5 Creedmoor, 6.5 PRC, .260 Remington, 6.5-284, and the 6.5×55 family. Reloaders working with slower powders like H4350, Reloder 26, and Reloder 19 have found solid accuracy nodes, with many reporting sub-half-MOA groups once dialed in.
A quick note worth making: the MatchKing is a target bullet first and foremost. Sierra does not recommend it for most hunting applications since the jacket design isn't built for reliable expansion. For paper, steel, and F-Class work at long range, though, it's tough to beat.
Key Specifications
- Manufacturer: Sierra
- Model: MatchKing
- Manufacturer Part Number: 1755
- UPC: 092763017555
- Bullet Caliber: 6.5mm
- Bullet Diameter: .264 in
- Bullet Weight: 150 Grain
- Bullet Style: Hollow Point Boat Tail (HPBT)
- Ballistic Coefficient (G1): .713 at 1760 fps and above
- Sectional Density: .307
- Recommended Twist Rate: 1 in 7.5 in or faster
- Jacket Material: Copper
- Core Material: Lead
- Application: Match, Target, Long Range
- Quantity: 100 per box
What’s Included
- 100 Sierra MatchKing 6.5mm (.264) 150 grain HPBT bullets
Frequently Asked Questions
What twist rate do I need to run the Sierra MatchKing 6.5mm 150 gr?
Sierra recommends a barrel twist rate of 1 in 7.5 inches or faster to fully stabilize this 150 grain bullet. Because it's a long, high-BC projectile, slower twists like 1:9 generally won't keep it stable. Many handloaders do report good results in 1:8 barrels when running it at typical match velocities, so a lot comes down to your specific rifle and load.
Can I use the 150 gr 6.5mm MatchKing for hunting?
Sierra does not recommend MatchKing bullets for most hunting applications. The thin jacket is engineered for accuracy and consistency rather than the reliable expansion you want on game. It's built for target shooting, steel, and long-range precision work where that high ballistic coefficient really pays off.
What cartridges is this 6.5mm MatchKing good for?
The .264 diameter and 150 grain weight make it a strong match for cartridges like the 6.5 Creedmoor, 6.5 PRC, .260 Remington, 6.5-284, and the 6.5×55 family. As long as your rifle has a case big enough to drive it and the right twist to stabilize it, you've got plenty of options. It has become a popular choice among long-range and F-Class reloaders.
Is this loaded ammunition or just the bullets?
This is a box of 100 bullets, meaning the projectiles only. They are reloading components and cannot be fired as-is. You'll need your own brass, primers, and powder to assemble a finished cartridge.







Reviews
There are no reviews yet.