Description
When reloaders talk about proven match bullets for the 6.5mm, the Sierra MatchKing is almost always in the conversation. This 150 grain Hollow Point Boat Tail wears a .264 diameter and carries the reputation Sierra built its name on, where the entire design philosophy starts and ends with putting rounds through the same hole. These come 500 to the box, which is a smart move for the high-volume reloader who burns through components at the range or on the line.
What Makes This 6.5mm MatchKing Tick
The magic is in the shape and the tolerances. A sleek 27 caliber elongated ogive paired with a final meplat-reducing pointing operation gives this bullet a high ballistic coefficient, so it hangs onto velocity downrange and fights wind drift better than blunter profiles. The G1 BC sits around 0.686 in the middle velocity band and climbs past 0.713 at higher speeds, which is why long-range folks keep coming back to it. The hollow point tip is kept small and tidy on purpose, all in the name of slicing through air cleanly.
Match-Grade Consistency You Can Load Around
Sierra holds these to standards that matter when you are chasing small groups. The thin jackets are drawn to a concentricity standard of 0.0003 inch maximum variation, and weight is controlled to within plus or minus 0.3 grain from bullet to bullet. There is also a bearing-surface-to-ogive junction machined at a 1.5 degree angle, matching the throat geometry found in a lot of match chambers, which helps the bullet start straight and square to the bore.
Twist Rate and Setup Notes
This is a heavy-for-caliber 150 grain projectile, so it needs some spin to stabilize properly. Sierra recommends a barrel twist rate of 1:7.5 inches or faster to keep it flying true. It settles in nicely across 6.5mm chamberings like the 6.5 Creedmoor and similar cartridges, and Sierra positions it strictly as a target bullet. Pair it with quality brass and a load worked up to your rifle and you have the makings of a tack-driving combination.
Key Specifications
- Manufacturer: Sierra
- Manufacturer Part Number: 1755C
- UPC: 092763517550
- Product Line: MatchKing
- Bullet Caliber: 6.5mm
- Bullet Diameter: .264 in
- Bullet Weight: 150 Grains
- Bullet Style: Hollow Point Boat Tail (HPBT)
- Ballistic Coefficient (G1): 0.686 (0.713 at higher velocity)
- Sectional Density: 0.307
- Jacket Material: Copper
- Core Material: Lead
- Recommended Twist Rate: 1:7.5 in or faster
- Weight Tolerance: +/- 0.3 grain
- Quantity: 500 Per Box
What’s Included
- 500 Sierra MatchKing 6.5mm .264 150gr HPBT match bullets
Frequently Asked Questions
What twist rate do I need for the Sierra MatchKing 6.5mm 150gr?
Sierra recommends a barrel twist rate of 1:7.5 inches or faster to properly stabilize this 150 grain bullet. Because it is a long, heavy-for-caliber projectile, slower twists may not keep it stable in flight. If your rifle is cut with a modern fast-twist 6.5mm barrel, you are in good shape.
What is the ballistic coefficient of this 150 grain MatchKing?
The G1 ballistic coefficient runs around 0.686 in the mid velocity range and climbs to roughly 0.713 at higher speeds. That high BC is why this bullet holds velocity and resists wind drift so well at distance. The elongated ogive and small meplat are a big part of what earns those numbers.
Are these Sierra MatchKing bullets good for hunting?
Sierra designs and recommends the MatchKing line strictly for target shooting. The thin jacket and hollow point are engineered for accuracy and consistency rather than controlled terminal expansion. For hunting you would want a bullet built specifically for game.
What cartridges can I load these 6.5mm bullets in?
These .264 diameter bullets work across common 6.5mm chamberings, including the popular 6.5 Creedmoor as well as other 6.5mm cartridges. As with any component, work up your load using published reloading data for your specific cartridge and rifle. The 500 count box gives you plenty to develop a load and then shoot it out.




Reviews
There are no reviews yet.