$325.80
25 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The 22 Creedmoor is the newest way to push a .224 bullet fast and flat, and this Shaw barrel is one of the more accessible ways to run it in a gas gun. Machined from 416R stainless steel with a 20-inch heavy barrel contour, it gives you the rigidity that precision shooting demands while a full run of straight flutes shaves a little weight and adds surface area for cooling. The 1-8 twist is dialed in to stabilize the heavier, high-BC .224 projectiles the cartridge was built around, so you can wring real long-range performance out of an AR-10.
Spun down from 6.5 Creedmoor brass, the 22 Creedmoor is known for high muzzle velocity and a flat trajectory that cuts down on wind drift at distance. Pair that with a bead-blast matte finish, a dimpled .750 gas journal, and a rifle-length gas system, and you've got a barrel set up for steady, repeatable shots whether you're ringing steel or chasing varmints and deer-sized game. It threads 1/2-28 at the muzzle, so your favorite brake or can adapter should thread right on.
This barrel is built for standard DPMS LR-308 Gen 1 pattern uppers, which covers the vast majority of AR-10 builds out there. Keep in mind it is not cut for small-frame AR-10 designs like the Ruger SFAR, POF Revolution, or F4 SF-10, so if you're running one of those, this isn't the pipe for you. For a traditional large-frame .308-pattern upper, it's a clean swap.
Shaw has a long track record of turning out quality barrels, and folks who know their glass report these holding their own against pricier name-brand options. If you want the ballistics of a modern long-range .224 in a semi-auto without breaking the bank on the barrel, this one earns its spot in the build.
This barrel runs a 1-8 twist, which is the standard for 22 Creedmoor. It's set up to stabilize the heavier, high-BC .224 bullets the cartridge was designed around. That's what lets you get flat trajectories and reduced wind drift at long range.
It's built for standard DPMS LR-308 Gen 1 pattern upper receivers, which is the most common large-frame AR-10 setup. It is not compatible with small-frame AR-10 designs such as the Ruger SFAR, POF Revolution/Rogue, or F4 SF-10. If you're running a traditional .308-pattern upper, it's a direct fit.
No, the barrel ships on its own without a gas block or tube. It uses a rifle-length gas system with a .750 dimpled gas journal, so any standard .750 gas block will seat properly. Many builders like to run an adjustable gas block to tune the system for the 22 Creedmoor's pressure.
The muzzle is threaded 1/2-28, the common pattern for .224 caliber barrels. That means most muzzle brakes, flash hiders, and suppressor adapters made for that thread pitch will screw right on. Just confirm your device is rated for the 22 Creedmoor's velocity.
| UPC | 810140172211 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | AR10HBSSSF2022CM |
You must be logged in to post a review.
Reviews
There are no reviews yet.