Description
If you're running a .410 for defense or close-range applications, you need ammunition that maximizes what the platform can deliver. These 3-inch shells are loaded with 15 pellets of 000 buckshot at 984 fps, which is a remarkably high pellet count for the .410 bore. Each pellet measures approximately .36 inches in diameter, striking that balance between delivering multiple projectiles and retaining enough individual mass for effective penetration.
Sellier & Bellot 000 Buckshot Performance
The real appeal here is the payload. Getting 15 pellets of large buckshot into a .410 shell is no small feat, and that density creates what you need at close range. The 11/16 oz shot weight combined with the higher pellet count means you're spreading more lead downrange than you'd get from most other .410 buckshot loads. This translates to a wider pattern and more impact points where it matters, especially within typical defensive distances of under 20 yards.
Why These .410 Shells Make Sense
The .410 gets a lot of criticism, but loads like this one address its real limitation: putting enough projectiles on target. The heavier recoil-free handling compared to 12 or 20 gauge makes follow-up shots easier, and the compact size of .410 firearms means they work in tight spaces. The plastic hull construction with brass-capped primers keeps things durable, while the plastic wad ensures consistent patterns. You're getting 25 rounds per box, which gives you a solid baseline for patterning or keeping reserve ammunition.
What to Expect
These are built for close-quarters use where shot placement matters more than range. You'll see tight patterns out to about 20-25 yards before dispersion becomes a factor. The muzzle velocity of 984 fps provides adequate energy transfer within defensive ranges. Sellier & Bellot manufactured these on their Elite Protection line, which means you're getting consistent components and reliable ignition.
Key Specifications
- Manufacturer: Sellier & Bellot
- Caliber/Gauge: .410 Bore
- Shell Length: 3 inch
- Shot Type: Lead Buckshot
- Shot Size: #000 Buck (.36 inch pellets)
- Pellet Count: 15 pellets per shell
- Shot Weight: 11/16 ounce
- Muzzle Velocity: 984 fps
- Hull Material: Plastic with brass-capped primer
- Wad Material: Plastic
- Rounds per Box: 25
- Boxes per Case: 20
- Model/MPN: SB410SDB
- UPC: 754908544714
What’s Included
- 25 rounds of .410 bore 3 inch 000 buckshot ammunition
Frequently Asked Questions
What makes these 15-pellet .410 buckshot shells different from other .410 buckshot loads?
The 15-pellet count is exceptionally high for a .410 shell, especially in 000 buckshot. Most .410 buckshot loads carry only 5-6 pellets, so this load delivers significantly more projectiles downrange, which creates a denser pattern and increases your hit probability at close range.
What's the effective range for these .410 shells?
These are designed for close-quarters use, with optimal performance inside 20-25 yards. Beyond that, pattern dispersion becomes too wide for reliable hits. The .410 bore is inherently a close-range platform, and this load maximizes that capability within its intended distances.
Are these shells good for hunting or just defense?
They work for both. The dense 15-pellet pattern makes them viable for close-range small game and varmint control, while the heavy payload is also appropriate for defensive applications in compact shotguns. Your specific use case should always follow local regulations.
Will these shells cycle properly in my .410?
These are factory-loaded with standard .410 dimensions and brass-capped primers, so they should feed reliably in any shotgun or revolver properly chambered for 3-inch .410 shells. Always verify your firearm's chamber marking before purchasing ammunition.





Reviews
There are no reviews yet.