Description
Seekins built the HAVAK line around the idea that one rifle should be able to do more than one job, and this M2 Magnum Bolt Head is a big part of how that works. It's the magnum-faced version of the removable bolt head that comes standard on Gen 2 HAVAK actions, machined to accept the larger case heads found on rounds like 300 Win Mag, 7mm Rem Mag, 300 PRC, and similar magnum cartridges.
Compatibility with the Seekins M2 Bolt Head
This bolt head is built for HAVAK rifles running the current Gen 2 bolt, which covers the PH2, Element, and HIT models. It is not intended for the newer PH3 or Element M3 platforms, which use a different Gen 3 bolt and require the M3-specific bolt head instead. If you're rebarreling a PH2 or HIT from a standard-diameter chambering into something with a magnum bolt face, this is the part that makes it possible.
Swapping Bolt Faces Without a Toolbox
One of the better parts of owning a HAVAK is how little fuss it takes to change bolt heads. Rotate the bolt shroud to free the firing pin assembly, tap out the small cross pin holding the head in place, and the old bolt head slides right off. The M2 Magnum Bolt Head slides on in its place, and an indexed extractor tail keeps you from putting it in backwards. A quick peek through the back of the bolt to confirm the retaining pin is seated correctly, and you're back in business with a rifle chambered for a completely different cartridge.
Fit and Finish on the M2 Magnum Bolt Head
Seekins machines this bolt head from the same tool steel used in the rest of the HAVAK bolt assembly, matched with anti-galling properties so it cycles smoothly instead of binding up after repeated use. It carries the M16-style extractor claw that HAVAK bolts are known for, which helps rounds feed and extract cleanly even when you're running a magnum case with a bit more resistance. Like the rest of the Seekins parts catalog, it's backed by their lifetime warranty, so if something ever goes sideways with the part itself, they'll stand behind it.
Key Specifications
- Manufacturer: Seekins Precision
- Manufacturer Part Number: 11720003F
- UPC: 811452021662
- Bolt Head Type: M2 Magnum (Gen 2 Bolt)
- Compatible Rifles: HAVAK PH2, Element, and HIT (Gen 2 Bolt models only)
- Installation: Toolless, drop-in swap
- Extractor Style: M16-style claw extractor
- Material: Machined tool steel with anti-galling properties
- Country of Origin: USA, made in Idaho
- Warranty: Seekins Precision unconditional lifetime warranty
What’s Included
- Seekins Precision M2 Magnum Bolt Head
Frequently Asked Questions
Will the M2 Magnum Bolt Head fit my HAVAK PH3 or Element M3?
No, this is not the right part for those rifles. The PH3 and Element M3 use Seekins' newer Gen 3 bolt system and need the M3-specific bolt head instead. This M2 Magnum Bolt Head is built for HAVAK rifles running the Gen 2 bolt, which covers the PH2, Element, and HIT lineups.
Do I need gunsmithing tools to install this bolt head?
Nope, that's one of the better features of the HAVAK system. You rotate the bolt shroud to release the firing pin assembly, tap out the small cross pin holding the old bolt head, and slide the new one into place. The extractor tail is indexed so it can only go in the correct way.
What cartridges does the magnum version of this bolt head cover?
The magnum bolt face is sized for cartridges with larger case heads, things like 300 Win Mag, 7mm Rem Mag, 28 Nosler, 300 PRC, and 338 Win Mag. If your new barrel is chambered in one of those or a similar magnum round, this is the bolt head you need paired with it.
Does swapping to this bolt head also mean I need a new magazine?
In most cases yes. HAVAK rifles use different magazines for standard versus magnum length cartridges, so switching bolt faces usually goes hand in hand with swapping to a magnum-compatible magazine and a correctly chambered barrel.



Reviews
There are no reviews yet.