Description
If you already own a Seekins HAVAK M3 rifle, you know the whole appeal of the platform is how easily it switches calibers. This M3 ARC bolt head is the piece that makes that happen when you want to run 6mm ARC, 22 ARC, or other cartridges built on that same Grendel-family case head. It slots into the M3 bolt body in place of your standard or magnum bolt head, giving the action a properly sized bolt face and extraction geometry for the ARC family instead of forcing a mismatched setup.
What Makes the M3 ARC Bolt Head Different
The ARC cartridge family runs on a case head that sits between the .223/5.56 bolt face and the standard short action size, so it needs its own dedicated bolt head rather than something borrowed from another caliber group. Seekins built this one around their three-lug design, which spreads the locking surface out more evenly than a traditional two-lug setup and pairs it with a sliding extractor built into one of the lugs along with dual ejectors. That combination is part of why the M3 action feels so smooth cycling higher pressure ARC loads.
Installing the M3 Bolt Head Without a Toolbox
Swapping bolt heads on the M3 system does not call for a vise, a punch set, or a trip to a gunsmith. You twist the bolt shroud free, tap out the small cross pin holding the current bolt head in place, and drop the new one in. The extractor tail is intentionally raised so it only lines up one way, which takes the guesswork out of reassembly. Guys who've run 22 ARC or 6mm ARC barrels on their PH3 or Element M3 have picked up this exact bolt head alongside a barrel swap to turn their existing rifle into a second caliber setup for the cost of a couple of parts instead of a whole new rifle.
This bolt head is a direct fit for any rifle running the current M3 bolt system, which covers the PH3, Element M3, and HIT PRO M3 lines. It is not interchangeable with the older Gen 2 HAVAK bolt found on the PH2 and earlier Element rifles, so double check which generation of bolt your rifle uses before ordering. Like the rest of the Seekins parts lineup, it is built in-house in Idaho and backed by their lifetime warranty.
Key Specifications
- Manufacturer: Seekins Precision
- Manufacturer Part Number: 11700255F
- UPC: 811452025448
- Compatible Platform: HAVAK M3 Rifles (PH3, Element M3, HIT PRO M3)
- Cartridge Family: ARC (6mm ARC, 22 ARC, and other Grendel-case-head cartridges)
- Bolt Design: 3-Lug, tool-less removable bolt head
- Extractor: Sliding extractor integrated into bolt lug
- Ejector: Dual ejector design
- Installation: Hand-installed, no tools required
- Country of Origin: Made in USA (Idaho)
- Warranty: Seekins Precision Lifetime Warranty
- Category: Bolt Action Rifle Parts & Accessories
What’s Included
- 1x Seekins Precision M3 ARC bolt head (complete assembly with extractor and ejectors installed)
Frequently Asked Questions
What rifles does the M3 ARC bolt head fit?
It's built for the current HAVAK M3 bolt system, which means it fits the PH3, Element M3, and HIT PRO M3 rifles. It is not compatible with the older Gen 2 HAVAK bolt used in the PH2 or original Element rifles, so make sure your rifle uses the M3 bolt before ordering.
Do I need any tools to install this bolt head?
No. The M3 bolt system is designed to be tool-less, so you just twist off the bolt shroud, tap out the small retaining pin, and swap the old bolt head for the new one. The extractor is keyed to only go in one way, so there's no risk of installing it backwards.
What cartridges is the ARC bolt head meant for?
This bolt head is sized for the ARC cartridge family, primarily 6mm ARC and 22 ARC, which share a case head diameter closer to the 6.5 Grendel lineage rather than the .223/5.56 or standard short action bolt face. If you're building or converting to one of those calibers on your M3 platform, this is the bolt head you'll need.
Can I use this bolt head with any barrel, or does it need to match?
The bolt head needs to be paired with a barrel chambered for a cartridge in the ARC/Grendel case head family, like a 6mm ARC or 22 ARC barrel. Mixing a bolt head sized for one cartridge family with a barrel chambered for another isn't something we'd recommend, since headspace and extraction depend on the two matching up.




Reviews
There are no reviews yet.