0
0

Seekins Precision .875 Low Profile Adjustable Gas Block, Steel

UPC: 811452023208

$66.00

8 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

A tuned gas system changes how a rifle feels and runs, and this Seekins Precision Low Profile Adjustable Gas Block gives you the control to get there. Built for a .875 diameter gas seat, it lets you meter exactly how much gas goes back to cycle the action. That means softer recoil, faster follow-up shots, less brass flung across the range, and a bolt carrier that stays cleaner over a long day. It's a common upgrade for anyone building out an AR or trying to smooth out a rifle that runs overgassed from the factory.

Tuning the Seekins .875 Gas Block

Adjustment is straightforward. You turn the gas regulating screw in to cut gas back or out to add more, then lock the setting in place with the brass-tipped set screw so it won't wander under recoil. The brass tip protects the threads and holds your setting where you left it. This is especially handy for suppressed shooting or load development, where backing the gas down keeps the action from slamming and cuts down on the extra gas blowback that comes with running a can.

Why the Low Profile Design Matters

The whole point of a low profile block is clearance. This one is machined slim enough to tuck under most free-float handguards, so you get the tuning benefits without the block bumping into your rail. It's cut from 1144 steel with a black Melonite finish, which stands up to the heat and erosion that a gas block deals with shot after shot and helps stretch out service life. Mounting is handled by two set screws that clamp it down onto the barrel's gas seat.

This is a rifle-length-friendly, no-frills piece for folks who want to fine-tune once and forget about it. If you're chasing reliable cycling with a suppressor or just want your AR to shoot flatter and cleaner, a set-screw adjustable block like this earns its keep.

Key Specifications

  • Manufacturer: Seekins Precision
  • Manufacturer Part Number: 11510087F
  • UPC: 811452023208
  • Type: Low Profile Adjustable Gas Block
  • Bore Diameter: .875 inch
  • Material: 1144 Steel
  • Finish: Black Melonite / Black Oxide
  • Adjustment: Gas regulating screw with brass-tipped locking set screw
  • Mounting: 2 set screws
  • Platform: AR-15
  • Color: Black

What’s Included

  • Seekins Precision .875 low profile adjustable gas block
  • Mounting set screws
  • Gas adjustment / brass-tipped locking set screw

Frequently Asked Questions

What barrel does the .875 gas block fit?

This block is machined for a .875 diameter gas seat, so your barrel needs a journal cut to that size where the gas block sits. Plenty of heavier profile and larger caliber AR barrels use the .875 seat rather than the more common .750. Double-check your barrel's gas seat diameter before ordering so you get the right fit.

Will this gas block fit under my handguard?

It's built low profile to tuck under most free-float handguards without issue. Clearance depends on your specific rail's inner diameter, so give yourself a little room if you're running a snug tube. If your handguard clears a standard low profile block, this one should slide right under.

How do I tune the Seekins adjustable gas block?

You turn the gas regulating screw in to reduce gas or out to add more, then snug the brass-tipped set screw to lock the setting in place. Start with a bit more gas than you think you need, then back it down until you find the softest setting that still cycles and locks the bolt open reliably on an empty mag. Once it's dialed, the brass tip keeps your setting from backing out under recoil.

Is an adjustable gas block worth it for suppressed shooting?

Yes, this is one of the main reasons folks add one. A suppressor increases back pressure and dumps more gas into the action, which can beat up your rifle and blow gas back at your face. Being able to cut the gas down keeps the action running smoother, reduces wear, and makes a suppressed AR much more pleasant to shoot.

Additional information

UPC

811452023208

Manufacturer

Manufacturer Part Number

11510087F

Reviews

There are no reviews yet.

Be the first to review “Seekins Precision .875 Low Profile Adjustable Gas Block, Steel”