Description
Timing a muzzle brake is one of those small chores nobody enjoys. Shim kits, crush washers, checking port alignment, doing it all over again when it sits crooked. The SilencerCo TOMD Compact Radial Brake skips all of that. Because the ports are arranged radially around the entire body, there is no top or bottom to worry about. Spin it on, snug it down with the built-in wrench flats, and you are done. No shims, no timing, no fuss.
Why the TOMD Radial Brake Earns Its Spot
Despite its small footprint, this brake does real work taming recoil. The radial port layout vents gas in every direction to pull the sting out of each shot, and the compact profile keeps weight and added length to a minimum. At just 2.4 inches long and a hair over two ounces, it will not turn your rifle into a nose-heavy chore to carry. The matte black finish keeps things subdued and holds up well to regular range use.
Built for SilencerCo Thread Over Mounts
The TOMD in the name stands for Thread Over Muzzle Device, and that is where this brake really separates itself from a basic recoil device. It serves as the mounting interface for SilencerCo's TOM (Thread Over Mount) system, which lets you thread a compatible suppressor over the brake for quick attach and detach. SilencerCo describes it as combining the repeatability of their ASR mounts with the simplicity of a direct thread setup, and that is a fair way to put it. Leave the brake on the rifle full time, then add or remove your can in seconds without tools.
Picking the Right TOMD Version
This is the AC5232 model, which pairs 1/2×28 threads with a .30 caliber aperture. That combination is tailor-made for 300 Blackout barrels, which typically run 1/2×28 threading but need the larger bore. If you are running 5.56, look at the AC5231 instead, and 5/8×24 .30 cal barrels want the AC5233. Match the threads and bore to your barrel and this little brake will serve you well, suppressed or not.
Key Specifications
- Manufacturer: SilencerCo
- Model: TOMD Compact Radial Brake
- Manufacturer Part Number: AC5232
- UPC: 816413028261
- Product Type: Muzzle Brake
- Caliber: .30 Caliber (7.62 aperture)
- Thread Pattern: 1/2×28 TPI
- Length: 2.4 in
- Weight: 0.14 lb (approx. 2.2 oz)
- Finish: Matte Black
- Mount Compatibility: SilencerCo Thread Over Mounts (TOM)
- Timing Required: No, omnidirectional radial design
What’s Included
- SilencerCo TOMD Compact Radial Brake (AC5232)
Frequently Asked Questions
Do I need to time or shim the SilencerCo TOMD Radial Brake?
No, and that is one of its best features. The ports are arranged radially around the entire brake, so there is no correct clock position. Just thread it onto a clean, properly threaded barrel and tighten it down using the wrench flats. No shim kits or crush washers needed.
Which suppressors work with the TOMD Compact Radial Brake?
This brake is the muzzle-side half of SilencerCo's TOM (Thread Over Mount) system. Any SilencerCo suppressor fitted with a compatible Thread Over Mount can attach directly over this brake for quick on and off. It also works fine as a standalone muzzle brake if you are not running a can.
Why does a .30 caliber brake have 1/2×28 threads?
This combination is aimed squarely at 300 Blackout rifles, which typically use 1/2×28 barrel threading but fire a .30 caliber projectile. The AC5232 gives you the correct 7.62 aperture on that thread pitch. If your .30 cal barrel is threaded 5/8×24 instead, the AC5233 version is the one you want.
How much length and weight does the TOMD brake add to my rifle?
Not much at all. The brake measures 2.4 inches long and weighs right around 2.2 ounces. It was intentionally designed as a smaller form radial brake, so you get solid recoil reduction and a suppressor mounting point without adding a bunch of bulk to the end of your barrel.





Reviews
There are no reviews yet.