Description
Here's a problem that catches a lot of rimfire suppressor owners off guard: plenty of .22 LR barrels come threaded to AR-15 length instead of the shorter rimfire spec. Most rimfire cans are built around a thread length of .400 inches or less, so when you spin one onto a longer AR-style tenon, it runs out of internal threads before the mount ever touches the barrel shoulder. The can never seats, alignment gets sloppy, and that's exactly how baffle strikes happen. The SilencerCo Delta Thread Spacer is the clean fix. It slips over your 1/2×28 threads and takes up roughly 0.25 inches of the excess, letting the suppressor bottom out square against a solid surface the way it should.
Why the Delta Spacer Earns a Spot in Your Range Bag
This is one of those parts that costs next to nothing compared to what it protects. A rimfire suppressor that isn't shouldered correctly can shift under fire, and even a slight misalignment on a .22 can chew up baffles fast. The Delta spacer keeps everything concentric with the bore so your can sits tight, tracks straight, and comes back to the same position every time you mount it. It's machined from steel with a black oxide finish, and at around 0.67 inches in diameter it blends right in behind most rimfire suppressors without looking like an afterthought.
Fit and Compatibility for the SilencerCo Delta Thread Spacer
SilencerCo built this one with its own rimfire lineup in mind, so it pairs naturally with the Sparrow 22, Switchback 22, Warlock 22, and Spectre 22. That said, the concept applies to most rimfire cans that hang up on long 1/2×28 threads. If your suppressor stops turning before it reaches the shoulder and you can still see exposed threads behind it, this spacer is almost certainly what you need. Installation is about as easy as it gets: slide it on, thread your can down, and get back to quiet plinking.
Key Specifications
- Manufacturer: SilencerCo
- Model: Delta Thread Spacer
- Manufacturer Part Number: AC114
- UPC: 817272010497
- Thread Pattern: 1/2×28
- Caliber: .22 LR
- Material: Steel
- Finish: Black Oxide
- Thread Take-Up: Approximately 0.25 in
- Intended Use: Barrels with thread length over 0.400 in
- Outside Diameter: Approximately 0.67 in
- Suppressor Compatibility: Sparrow 22, Switchback 22, Warlock 22, Spectre 22
- Color: Black
What’s Included
- SilencerCo Delta 1/2×28 thread spacer
Frequently Asked Questions
How do I know if I need the SilencerCo Delta thread spacer?
Thread your rimfire suppressor onto the barrel by hand. If it stops turning before it contacts the barrel shoulder and you can see exposed threads between the can and the shoulder, your threads are longer than the .400 inch rimfire spec. This spacer fills roughly a quarter inch of that gap so the can seats solidly.
Which suppressors does the Delta thread spacer work with?
SilencerCo lists it as compatible with the Sparrow 22, Switchback 22, Warlock 22, and Spectre 22. In practice, it can help most rimfire suppressors that won't shoulder on over-length 1/2×28 threads, since it simply shortens the effective thread length. Just confirm your can's mount depth pairs up well with the roughly 0.25 inch of take-up.
Why does it matter if my suppressor doesn't seat against the shoulder?
A suppressor that isn't shouldered can sit slightly off axis from the bore and loosen or shift during a shooting session. On a rimfire can, even minor misalignment raises the risk of a baffle strike, which is an expensive repair. Seating square against the shoulder keeps the can concentric and locked in place.
Can I use this spacer on a pistol or 5.56 rifle?
It's designed for .22 LR rifle barrels with 1/2×28 threads cut longer than rimfire spec, which is common on barrels threaded to AR-15 length. It's not a booster component or a centerfire mount, so keep it in the rimfire lane. For pistols with boosters or centerfire hosts, you'd want a different mounting solution.





Reviews
There are no reviews yet.