$79.90
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Hybrid 46 is a do-everything suppressor, but that big .46 caliber bore leaves performance on the table when you're running smaller rounds through it. That's exactly what this front cap fixes. The SilencerCo Bravo Front Cap in 9mm (AC1412) tightens the exit bore down to .355, which keeps more gas working inside the can instead of dumping out the front. The result is a suppressor that sounds noticeably better on 9mm hosts, typically in the range of 2 to 5 dB quieter depending on your setup.
Multi-caliber suppressors are all about trade-offs, and the Bravo Front Cap lets you have it both ways. Keep the standard cap installed when you're shooting bigger bores, then thread this one on when the can is riding on a 9mm pistol, carbine, or subgun. It takes seconds to swap and turns your Hybrid into something much closer to a dedicated 9mm can. It also replaces the Anchor Brake, which shaves noticeable length off the front end and cleans up the profile if you're not a fan of shooting behind a brake.
This is the Sniper Gray version, machined from high-strength stainless steel with clean, precise threads that seat up flush like it came from the factory that way, because it did. The 9mm version of the Bravo Front Cap is built for the Hybrid 46 specifically, so double check that's the can you're running before ordering. SilencerCo makes these caps in several bore sizes, and matching the cap to your caliber is the whole point.
If you bought a Hybrid 46 to cover everything from pistols to big-bore rifles, this cap is one of the cheapest and easiest upgrades you can make. It's a small part that makes a real difference every time you pull the trigger on a 9mm host.
No, and here's why. The Omega 300 is a .30 caliber can, so a .355 bore cap won't clear its intended calibers the way it should. SilencerCo lists this 9mm version (AC1412) as Hybrid only, so it belongs on the Hybrid 46. Other bore sizes in the Bravo cap lineup cover the Omega 300.
Running the correct caliber-specific cap typically nets you around 2 to 5 dB of additional suppression on 9mm hosts. That may not sound like much on paper, but it's a difference your ears will pick up, especially with subsonic ammo. Tightening the exit bore from .46 to .355 keeps more gas contained inside the baffle stack where it belongs.
Yes. It threads on in place of the Anchor Brake and trims roughly an inch off the overall length of the suppressor. You lose the brake function but gain a shorter, flatter front end, which a lot of folks prefer on pistol and pistol-caliber carbine setups.
Only calibers with a bullet diameter of .355 or smaller can pass through this cap safely. Anything larger, like .40, .45, or .458, requires swapping back to the appropriate cap first. The good news is the swap takes just a few seconds, so switching between hosts at the range is no hassle.
| UPC | 817272016581 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | AC1412 |
| Caliber/Gauge | 9mm |
| Color | Gray |
| Length | 7 |
| Model | |
| Package Height | 0.5 |
| Package Width | 5.0 |
| Product Type | Accessory-Silencer Accessories |
| Shipping Weight | 0.09 |
You must be logged in to post a review.
Reviews
There are no reviews yet.