Description
A good flash hider should do two things: keep your muzzle flash from lighting up the night, and stay out of your way. The SilencerCo ASR Flash Hider does both, and then pulls double duty as the host-side mount for SilencerCo's ASR (Active Spring Retention) quick-attach system. Thread it onto any .30 caliber barrel with a 5/8-24 muzzle, and you've got a rifle that's ready to run suppressed or bare with just a twist of the wrist.
Why This ASR Flash Hider Earns Its Spot on Your Barrel
The 3-prong design does a solid job of breaking up flash signature, which matters a lot for low-light hunts, night shoots, or anytime you'd rather not blind yourself after the first shot. Where SilencerCo really got it right is the resonance suppression built into the prongs. Most 3-prong devices ring like a tuning fork after every shot, and once you've heard it, you can't unhear it. This one stays quiet. It's machined from steel with a black finish that shrugs off carbon and weather, so it'll look and work the same after a few thousand rounds.
Quick-Attach Suppressor Mounting Made Simple
Here's the real draw for suppressor owners: the ASR interface. SilencerCo's ASR mount comes standard on the Omega 300, Omega 36M, Hybrid 46M, Chimera 300, Saker ASR, and Specwar suppressors, and it's an add-on option for plenty of others through the Alpha, Bravo, and Charlie mounting systems. Spin your can on with one hand, snug the locking ring, and it stays put through heavy strings of fire without rotating or backing off. When you're done, it comes off just as fast. If you run one suppressor across multiple rifles, drop one of these on each host and swapping takes seconds instead of a trip to the bench.
Installation is refreshingly simple too. No shims or thread locker needed, just a proper torque on clean threads and you're set. For .308, 6.5 Creedmoor, .300 Blackout, or any other .30 cal and under bore with 5/8-24 threads, this is one of the easiest upgrades you can make.
Key Specifications
- Manufacturer: SilencerCo
- Model: ASR Flash Hider
- Manufacturer Part Number: AC590
- UPC: 817272011425
- Caliber: .30 Cal / 7.62mm (.308 Win / 7.62 NATO)
- Thread Pattern: 5/8"-24 tpi
- Material: Steel
- Finish: Black
- Length: 2.4 in
- Design: 3-prong with resonance suppression
- Mount Compatibility: SilencerCo ASR (Active Spring Retention) system
- Weight: Approx. 4 oz
What’s Included
- SilencerCo ASR Flash Hider, 5/8-24, .30 Cal
Frequently Asked Questions
Which suppressors work with the SilencerCo ASR Flash Hider?
It pairs with any SilencerCo suppressor running the ASR mounting system. That includes the Omega 300, Omega 36M, Hybrid 46M, Chimera 300, Saker ASR, and the Specwar line out of the box. Several other SilencerCo cans can use it too when equipped with an Alpha, Bravo, or Charlie ASR mount.
Do I need shims or Rocksett to install the ASR Flash Hider?
No. Unlike a muzzle brake that needs to be timed to a specific position, a flash hider like this one doesn't require indexing, so shims and thread locker aren't necessary. Clean the threads, torque it down properly, and you're good to go.
Will this .30 cal ASR Flash Hider ring or ping when I shoot?
That tuning-fork ping is a common complaint with 3-prong devices, but SilencerCo built resonance suppression into this design specifically to eliminate it. You get the flash reduction benefits of a prong-style hider without the annoying hum after each shot.
Can I use the SilencerCo ASR Flash Hider on a 6.5 Creedmoor or .300 Blackout rifle?
Yes. The bore is sized for .30 caliber and under, so anything from .308 and 7.62 NATO down to 6.5 Creedmoor and .300 Blackout works fine, as long as your barrel is threaded 5/8-24. Just confirm your muzzle threads before ordering since some barrels in these calibers use different patterns.




Reviews
There are no reviews yet.