$36.00
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you've got an older Savage Mark II and you're tired of fighting cheap two-piece bases, this EGW rail is the kind of upgrade you set and forget. It's a one-piece Picatinny mount machined from domestic 6061-T6 extruded aluminum, finished in matte black anodizing, and built specifically for Mark II rifles wearing the smaller 1-3/8" (1.375") ejection port. The full-length cross slots give you plenty of room to slide your rings fore and aft, so dialing in proper eye relief is simple no matter what optic you're running.
The built-in 20 MOA angles your scope slightly downward, which frees up roughly 20 extra minutes of upward elevation travel in your turret. That's the difference between running out of adjustment and actually reaching out there. EGW suggests the 20 MOA version for folks shooting in the 150 to 300 yard range, so if you're pushing your .22 or rimfire past plinking distance, this is the one you want.
This rail is cut for the older 1-3/8" ejection port only, and it will not fit newer Mark II or Savage 93 rifles that use the larger 1-5/8" port. Worth measuring your port before ordering so you land on the right base. The one-piece design bridges the receiver for a rigid, stable platform that beats two-piece setups for consistency, and the milled center channel trims the weight down to around two ounces without giving up strength. It's beveled on both sides, so it works for righties and lefties alike, and in many cases it won't block your factory iron sights.
Installation is straightforward. The base accepts standard Picatinny or Weaver rings, and EGW includes the mounting screws and a Torx bit in the box. They recommend torquing the screws to 20 inch-pounds with a drop of blue Loctite to keep everything locked in through recoil and range sessions. From the mounting hardware down to the packaging, the whole thing is made in the USA.
It fits older Savage Mark II rifles that have the smaller 1-3/8" (1.375") ejection port, and it also works for the Savage Mark I. It does not fit newer Mark II or Savage 93 rifles that use the larger 1-5/8" ejection port, so measure your ejection port before ordering to be sure you get the right base.
The 20 MOA is a built-in cant that angles your scope slightly downward, giving you roughly 20 extra minutes of upward elevation travel in your turret. That extra range is handy for longer rimfire shots, and EGW recommends the 20 MOA version for distances in the 150 to 300 yard range. If you mostly shoot inside 150 yards, a 0 MOA base is the better match.
This is a Picatinny-style base, so it accepts standard Picatinny or Weaver scope rings. Rings are not included, so you'll need to pick up a set separately. The full-length cross slots let you position the rings where you need them for proper eye relief.
Yes, EGW includes the mounting screws and a Torx bit in the box. They recommend torquing the screws to 20 inch-pounds and adding a drop of blue Loctite to keep everything secure. That bit of thread locker goes a long way toward keeping your zero steady over time.
| UPC | 841370105632 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 41502 |
| Color | Black |
| Length | 8 |
| Model | |
| Style | Picatinny Rail |
You must be logged in to post a review.
Reviews
There are no reviews yet.