0
0

EGW Savage B.Mag 0 MOA Picatinny Rail Scope Mount – Black 41970

UPC: 841370105809

$34.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The EGW Savage B.Mag scope mount replaces the factory bases with a single, continuous Picatinny rail that gives you far more flexibility than a two-piece setup. It's machined from domestic 6061 T6 extruded aluminum and finished in matte black anodizing, so it shrugs off the field without adding weight. At right around 2 ounces, you barely notice it's there, and the full run of Picatinny cross-slots means you can slide your rings fore and aft to get eye relief sitting just right.

Built Around the Savage B.Mag

This is a dedicated fit for the Savage B.Mag chambered in .17 WSM. It drills to the factory scope mount holes on the receiver, so there's no gunsmithing involved. One detail worth knowing: the rail has an ejection port cutout on the right side to clear the action, which also means it is not ambidextrous and won't work on a left-hand gun. If you're unsure, measure the hole spacing on your receiver against the 3.195 inch center spread before you order.

Why a 0 MOA Mount Makes Sense

The 0 MOA designation means the rail sits flat with no built-in cant, which is the right call for the ranges most B.Mag owners shoot. EGW suggests the 0 MOA for closer-in work and the 20 MOA version if you're reaching way out there. For plinking, varmints, and general range time with the .17 WSM, this flat base keeps your scope centered in its adjustment range.

Easy to Install and Ready to Run

Everything you need to get it on the gun comes in the box. It ships with #6-48 screws and a T-10 Torx bit, and EGW recommends snugging things down to 20 inch-pounds with a drop of blue Loctite so nothing walks loose under recoil. The milled center channel trims weight and, in many cases, leaves your factory iron sights usable. It accepts any standard Picatinny or Weaver rings, so you've got plenty of room to run whatever optic you like.

Key Specifications

  • Manufacturer: Evolution Gun Works (EGW)
  • MPN: 41970
  • UPC: 841370105809
  • Fits: Savage B.Mag
  • Elevation / Cant: 0 MOA
  • Rail Type: One-Piece Picatinny
  • Material: 6061 T6 Extruded Aluminum
  • Finish: Matte Black Anodized
  • Center Spread: 3.195 in
  • Overall Length: 5.882 in
  • Height: 0.4 in (top of receiver to top of rail)
  • Weight: 2 oz
  • Ambidextrous: No (ejection port cutout on right side)
  • Torque Spec: 20 in-lbs
  • Ring Compatibility: Picatinny or Weaver rings
  • Made In: USA

What’s Included

  • EGW Savage B.Mag 0 MOA Picatinny rail scope mount
  • #6-48 x 1/4 mounting screws
  • T-10 Torx bit

Frequently Asked Questions

What rifle does the EGW Savage B.Mag 0 MOA rail fit?

It's built specifically for the Savage B.Mag, the straight-pull bolt rifle chambered in .17 WSM. The rail drills to the factory scope mount holes on the receiver, so there's no drilling or tapping required. It's a good idea to measure your receiver's hole spacing against the 3.195 inch center spread to confirm the match before mounting.

Will this mount work on a left-handed Savage B.Mag?

No. The rail has an ejection port cutout machined into the right side to clear the action, which makes it non-ambidextrous. It's intended for right-hand receivers only.

What kind of rings do I need for the Savage B.Mag scope mount?

The rail uses a standard Picatinny slot pattern, so it accepts any Picatinny or Weaver scope rings. Pick your ring height based on your scope's objective diameter and how low you want to sit. The full-length cross-slots let you position the rings to get your eye relief dialed in.

Should I choose the 0 MOA or the 20 MOA B.Mag rail?

The 0 MOA rail sits flat with no cant and is the better pick for most B.Mag shooting at closer and mid ranges. EGW suggests the 20 MOA version if you plan to stretch things out to the far end of the .17 WSM's capability. For general range and field use, 0 MOA keeps your scope centered in its adjustment travel.

Additional information

UPC

841370105809

Manufacturer

Manufacturer Part Number

41970

Action

Color

Black

Length

8.6000

Style

Picatinny Rail

Reviews

There are no reviews yet.

Be the first to review “EGW Savage B.Mag 0 MOA Picatinny Rail Scope Mount – Black 41970”

Related Products